
TB220505S29 Solar Panel Training Kit Didactic Equipment Solar Photovoltaic Training Panel
TB220505S29 Solar Panel Training Kit Didactic Equipment Solar Photovoltaic Training Panel for college, vocational training center, university.
- Description
- Inquiry
TB220505S29 Solar Panel Training Kit Didactic Equipment Solar Photovoltaic Training Panel
1 Overview
This system can simulate the process of solar power generation, and enable the students to directly recognize the photovoltaic power generation system. And enable students to be familiar with photovoltaic system composition, connection and run principle. To cultivate students to master the corresponding knowledge, technical skills, it is suitable for teaching and training in university, college, technical school, technical institution, higher vocational education, polytechnics.
1.2 Feature
(1) Training workbench adopts aluminum column frame structure, installation type takes measurement meters and load module, training power box is inner integrated installation, there are wheels at the bottom of training workbench, every unit can be flexible move when doing experiment, it is convenient and easy to use, and very durable in use.
(2) Solar energy panel use aluminum frame to fix, it can adjust solar panel angle according to solar ray angle. There are wheels at the bottom of training workbench, every unit can be flexible move when doing experiment, it is convenient and easy to use, and very durable in use.
(3) Equip with full experiment circuit and components, it can combine and do different training content.
(4) Training workbench is with good safety protection system.
1.3 Capacity parameter
(1) Solar energy power generation set
(2) Solar training workbench
(3) Power box unit
(4) Solar cell
(5)Work environment :
Temperature -40~+60℃ temperature ≤80℃
Environment air : without corrosivity air, without fuel air, without a large quantity of conductive dust.
2.Specific characteristics:
•Battery: 12 volts, 160 amps, gel type.
•Includes: Cable extensions with socket and led bulbs.
•Modified wave inverter: 350 Watt.
•Solar panel: Polycrystalline.
•Power: 150 Watt.
•Regulator: 20 Amp. Additional Features:
•Solar panel mounted on reclining metal frame, with meter in degrees.
•Cell for measuring solar radiation.
•Temperature sensor .
•Frame for lamp modules.
•Charging module that includes mains voltage, dichroic and Led lamps, with independent switches.
•Electronic regulation module with screen. liquid crystal
•Rheostat .
•Ammeters .
•Metal frame for placing accessories.
•Electrical protection.
Related Products
SR2102 Photovoltaic Trainer Solar Trainer Solar Training Equipment
SR2102 Photovoltaic Trainer Renewable Training System Renewable Trainer
1 Product overview
1.1 Overview
This system can simulate the process of solar power generation, so that the students have a preliminary understanding of photovoltaic power generation systems, be familiar with the composition of photovoltaic power generation off-grid system, connection and operating principle. Training the student to the corresponding knowledge and skills, it is suitable for the engineering university, higher vocational colleges, secondary vocational schools and vocational school related professional teaching and skills training examination.
1.2 Feature
(1) Training workbench uses aluminum column frame structure, measuring instrument and load module use hanging box installation, training power supply built-in integrated installation, with a universal wheel at the bottom of workbench, the various units are flexible, it’s easy to use, not easy to damage.
(2) Solar panels using aluminum frame fix, can adjust the angle of the solar panels according to the angle of the sun’s rays, the bottom is equipped with universal wheel, it is flexible to move, and convenient to use.
(3) Experimental circuit and device configuration is complete, can be combined, to complete a variety of subjects of training content.
(4) Training bench has a good safety protection system.
1.3 Capacity
(1) Solar power systems: the aluminum alloy structure, photovoltaic panels angle is adjustable, with wheels at the bottom of workbench, it can be mobile and lockable, dimension: 1200 * 1200 * 1760 mm (L*W*H).
(2) Off-grid training workbench: fully aluminum alloy structure, with a universal wheel at the bottom, can be mobile and lockable, dimension 1000 * 800 * 1400 mm (L*W*H).
(3) Power box unit: aluminum panel structure, power supply components embedded installation, instrument and load module uses the aluminum alloy hanging box unit, the connection is convenient.
(4) Solar panels parameters are as follows:
The maximum rated power (Pmax) : 250 w
The high power voltage (Vmp) : 48.0 V
The most powerful current (Imp) : 5.2 A
The open circuit voltage (Voc) : 54.0 V
Short circuit current (Isc) : 5.5 A
The biggest system voltage: 1000 v DC
The output power of tolerance: ±3%
Working environment temperature: – 40 ℃, + 85 ℃
(5) the S – 3000-36 off-grid inverter
1.4 System introduction
The whole system can be divided into hardware and software two parts. Photovoltaic off-grid system consist of photovoltaic components, controller/inverter, mains supply (city electricity network). Photovoltaic off-grid system structure is as follows:
Hardware part contains three independent photovoltaic power generation system, off-grid inverter, power box, meter box, hanging load box, etc., three photovoltaic panels connect in parallel, connect to off-grid inverter via hotovoltaic (pv) interface,measure system parameters.
1. Solar panel with aluminum bracket, the bottom is equipped with universal wheel, is flexible mobile and can be locked, solar elevation angle is adjustable.
2. Off-grid inverter is fixed in the training workbench desktop, through the cable connection and convert electricity from solar panels to power frequency 220 v alternating current (AC), for the use of the load.
Software part is composed of PC software and data communication cable, PC monitoring software can real-time monitor the working state of the photovoltaic off-grid inverter system, the input voltage, output voltage, battery voltage, load rate, battery capacity, the output work power, such as real-time data.Home energy visualization test bench Renewable Training Equipment
ZM2136 Home energy visualization test bench Renewable Training Equipment Vocational Training Equipment for electrical laboratory in university, college, vocational training centers.
ZM2126 Renewable Training Equipment Solar Power Generation Trainer
ZM2126 Renewable Training Equipment Solar Power Generation Trainer
Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading renewable training equipment, photovoltaic trainer, solar energy trainer, wind power generation trainer, Fluid Lab Equipment,air conditioner trainer, refrigeration trainer, Thermal Lab Equipment, Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.
I. Equipment Overview
1 Introduction
1.1 Overview
This training system simulate demo solar generate electricity process, enable students to
learn solar generate electricity. Solar energy panel is driven by high work power metal
halide. This trainer cultivate students hand on ability, it’s suitable for engineering university,
training institute, technical schools.
1.2 Feature
(1)This trainer use aluminum column structure, with inner integrated measurement meters, there is universal wheels at the bottom, it’s easy to move.
(2) It can do many experiment circuit and components, students can combine them to
different circuit, do different experiments and training content.
(3) Training workbench with safety protection system.
2. Performance parameter
(1) Solar power generation device: full aluminum structure, adjustable photovoltaic panel, boundary dimension is 800mm*800mm*1200mm(length× width× height).
(2) Power box unit: aluminum profile structure, aluminum hanging box , boundary dimension 1080mm×300mm×740mm(length× width× height).
(3) Single solar energy cell plate:
(4) Battery technical specification:
(5) Work condition:
(6) Power:
3. System introduction
This system is consisted of four parts: photovoltaic power generation system, control system and inverter system. The photovoltaic power system is consisted of photovoltaic cell panel and battery. Control system is made up of solar power generation controller. Inverter system is made up of frequency inverter and load unit.
1. Simulative photovoltaic power generation system: this system adopts three pieces of 18V,20W solar panel, it can carry out series and parallel connection according to different system voltage, it can simulate the sunlight location through adjusting the relative location with photovoltaic panel, then it’s easy to simulate demonstration of various sunlight condition. Simulation photovoltaic power generator as shown below.
The output of photovoltaic cell panel connect to connecting box which located in the rear of device, output it through safety terminal. The rated output voltage of single block photovoltaic cell panel is 18V, three pieces of cell panel can operate individual, and it also can operate in parallel.Simulation photovoltaic power generator
Indicator light condition explanation
3.2 Power control panel
(1) Voltage, current output indicator
(2) Equip with power indicator, safety power output terminal.
(3) Inner with AC power source, with short circuit protection function. And students can observe inner power box structure through transparent window.
3.3 Equip components
(1) Controller hanging box 1 piece
(2) Inverter hanging box 1 piece
(3) Meter box hanging box 2 pieces
(4) Terminal load hanging box 2 pieces
(5) 4mm safety electrical connection cable 40 eas
4 Experiment list
(1) Battery feature test:1) electricity technical parameter 2) Battery connect in series and parallel
(2) Charge controller experiment:1) connect inversed protection experiment 2) Controller protection on battery overcharge 3) Controller protection on battery over discharging experiment 4) Anti reverse charge experiment
(3) Generator work power test experiment
(4) Photovoltaic battery open circuit voltage test experiment
(5) Photovoltaic battery short circuit current test experiment
(6) Photovoltaic battery work power test experiment
(7) To test photovoltaic battery different maximum test experiment under different illumination
(8) Photovoltaic battery output feature experiment
(9) Photovoltaic battery charging control principle experiment
(10)Photovoltaic battery anti reverse charging experiment
(11) Photovoltaic battery connect in series and parallel experiment
(12) Inverter basic principle experiment
(13) Simple inverter output waveform test experiment
(14) Photovoltaic battery connect in series and in parallel experiment
(15) Inverter basic principle experiment
(16) Simple inverter output waveform test experiment
(17) Inverter power drive AC load experiment
Simulative wind power generator, this system adopts horizontal shaft permanent magnet synchronous generator, it adopts air-blower to simulate natural wind, air-blower can select three wind speed, this system can simulate the change of wind direction and wind power through changing the speed and location of air-blower, then it can detect the generation effect under the corresponding condition. Simulation wind power generator is as shown below.Simulation wind power generator
As shown above, the left picture is wind power generator, the wind power generator output is three phases AC 12V, output terminal connect to the connection box which located in the underneath of equipment. Right picture is air-blower unit, its power supply is single phase AC 220V,50Hz, when it working, connect the pedestal of two portion together through profile connecting rod. As shown below.Connecting mode of simulation wind power generator
Controller panel picture
Indicator light condition explanation
3.2 Power control panel
(1) Voltage, current output indicator
(2) Equip with power indicator, safety power output terminal.
(3) Inner with AC power source, with short circuit protection function. And students can observe inner power box structure through transparent window.
3.3 Equip components
(1) Controller hanging box 1 piece
(2) Inverter hanging box 1 piece
(3) Meter box hanging box 2 pieces
(4) Terminal load hanging box 2 pieces
(5) 4mm safety electrical connection cable 40 eas
4 Experiment list
(1) Battery feature test:1) electricity technical parameter 2) Battery connect in series and parallel
(2) Charge controller experiment:1) connect inversed protection experiment 2) Controller protection on battery overcharge 3) Controller protection on battery over discharging experiment 4) Anti reverse charge experiment
(3) Simulate wind generating electricity system experiment
(4) Wind energy charging control experiment
(5) Generator work power test experiment
(6) Inverter basic principle experiment
(7) Simple inverter output waveform test experiment
(8) Inverter basic principle experiment
(9) Simple inverter output waveform test experiment
(10) Inverter power drive AC load experimentPhotovoltaic power generator Teaching Equipment Solar And Wind Training System
ZM2152 Photovoltaic power generator Teaching Equipment Solar And Wind Training System for college, vocational training center, university.
Solar Energy Teaching Equipment for Network Operation Renewable Training Equipment
ZE3716 Solar Energy Teaching Equipment for Network Operation Renewable Training Equipment Vocational Training Equipment Electrician Trainer for college, vocational training center, university.
ZM2119 Renewable Energy Trainer Solar And Wind Trainer
ZM2119 Renewable Energy Trainer Solar And Wind Trainer. Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.
Wind Energy Trainer with Wind Turbine Didactic Equipment Renewable Training Equipment
ZE3719 Wind Energy Trainer with Wind Turbine Didactic Equipment Renewable Training Equipment for college, vocational training center, university.
ZM2121C Solar Energy Trainer Solar Trainer Kit Vocational Training Equipment
ZM2121C Solar Energy Trainer Solar Trainer Kit Vocational Training Equipment
Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading renewable training equipment, photovoltaic trainer, solar energy trainer, wind power generation trainer, Fluid Lab Equipment,air conditioner trainer, refrigeration trainer, Thermal Lab Equipment, Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.
I. Equipment Overview
1 Introduction
1.1 Overview
This training system simulate solar generate electricity process, enable students to learn
wind and solar generate electricity. This trainer cultivate students hand on ability, it’s
suitable for engineering university, training institute, technical schools.
1.2 Feature
(1)Solar energy generate electricity set: use aluminum column structure, photovoltaic panel can track and be adjusted, simulate light source can be adjusted for 120 degree in horizontal direction.
(2) It can do many experiment circuit and components, students can combine them to different circuit, do different experiments and training content.
(3) Training workbench with safety protection system.
Training table size: aluminum frame, aluminum alloy hanging box unit form,the bottom is with universal wheels, dimensions 1400mm × 700mm × 1500mm (L×W×H)
Single solar panel parameters are as follows:
Rated peak power: 30 W
Short circuit current: 1.9 A
Peak current: 1.7 A
The open circuit voltage: 18.5 V
Accumulator technology parameters:
Voltage: 12 V
Capacity: 12 Ah
Battery lost electricity: 10V±1V
Execution standard: GB/T 9535
Relative Humidity: 35 ~ 85% RH (non-condensing)
Working environment: temperature -10 ~ +40 ℃ temperature≤80 ℃
Ambient air: non-corrosive, flammable gases, without a lot of conductive dust
Power consumption: ≤5000W,
Working power supply: AC220 ± 5%, DC24V /
Power supply: single-phase three-wire AC220 ± 5%, 50HZ
Work mode: continuous
Ⅱ. System Introduction
The system is divided into photovoltaic power generation system, control system and inverter system three parts, photovoltaic power generation system consists of analog light source devices, photovoltaic solar panels and storage batteries. The control system consists of photovoltaic controller. Inverter system consists of frequency inverter and the load unit.
1. Simulation photovoltaic power generation system: The system uses two 30W solar panels, they can be connected in series or in parallel depending on different system voltage, simulation sunlight device consists of two high-power metal halides, the relative position to photovoltaic panels can be adjusted to simulate sunlight location, it is convenient to simulate demonstration of various sunshine conditions.
2. Storage batteries: consists of four piece of 12V / 12AH maintenance-free sealed accumulators, they not only can be connected in parallel to 12V48AH system to use, but also can be connected in series to 24V / 24AH system to use, which can deepen understanding of the accumulators connected in series and parallel.
3. Controller hanging box: the box uses industrial charge controller, you can control the power of wind generators and photovoltaic panels to charge the battery, LCD display panel, and you can view the system operating parameters and can set user parameters yourselves, with perfect anti-overcharge, over-current protection function.
4. Inverter hanging box: uses 12V / 24V voltage intelligent recognition frequency inverter, output voltage AC220V, continuous power 600W, peak power 1000W. Conversion efficiency is greater than 90%, the low pressure automatic alarm.
5. Meter hanging box: can display generating voltage, generating current, charging voltage, charging current, inverter voltage, inverter current in real-time.
6. Terminal load hanging box: includes incandescent lamps, energy saving lamps and axial flow fans, and does different types of load tests for 220V AC converted by the inverter.
Ⅲ.Experiment content
1. Experiment list
(1) Battery feature test:1) electricity technical parameter 2) Battery connect in series and parallel
(2) Charge controller experiment:1) connect inversed protection experiment 2) Controller protection on battery overcharge 3) Controller protection on battery over discharging experiment 4) Anti reverse charge experiment
(3) Photovoltaic battery open circuit voltage test experiment
(4) Photovoltaic battery short circuit current test experiment
(5) Photovoltaic battery work power test experiment
(6) Photovoltaic battery output feature experiment
(7) Photovoltaic battery charging control principle experiment
(8)Photovoltaic battery anti reverse charging experiment
(9) Photovoltaic battery connect in series and parallel experiment
(10) Inverter basic principle experiment
(11) Simple inverter output waveform test experiment
(12) Inverter drive AC load experiment
(13) Through changing light source direct to measure solar energy cell current output
(14) Different illumination deserve Silicon cell experiment assembly voltage and current curve
(15) Through a Silicon cell used for different illumination insulation value to evaluate maximum output power
(16) Calculate photovoltaic cell efficiency
(17) Photovoltaic battery connect in series and in parallel experiment
(18) Calculate Silicon cell panel average powerSolar Power Generation Experiment Box Renewable Training Equipment
ZM2129 Solar Power Generation Experiment Box Renewable Training Equipment for college, university, vocational schools.
Photovoltaic System Off Grid Trainer Vocational Training Equipment Photovoltaic Generator Training System
SR2109R Photovoltaic System Off Grid Trainer Vocational Training Equipment Photovoltaic Generator Training System for college, vocational training center, university.