TB220505S27 Photovoltaic Power Generator Trainer Vocational Training Equipment Renewable Training Equipment

TB220505S27 Photovoltaic Power Generator Trainer Vocational Training Equipment Renewable Training Equipment

TB220505S27 Photovoltaic Power Generator Trainer Vocational Training Equipment Renewable Training Equipment for college, vocational training center, university. 

  • Description
  • Inquiry

TB220505S27 Photovoltaic Power Generator Trainer Vocational Training Equipment Renewable Training Equipment

1 Introduction 

1.1 Overview

This training system simulate demo wind and solar generate electricity process, enable students to learn

wind and solar generate electricity. This trainer cultivate students hand on ability, it’s suitable for

engineering university, training institute, technical schools.

1.2 Feature

(1)This trainer use aluminum column structure, with inner integrated measurement meters, there is universal wheels at the bottom, it’s easy to move.

(2) It can do many experiment circuit and components, students can combine them to different circuit, do

different experiments and training content.

(3) Training workbench with safety protection system.  

2. Capacity

(1)Wind power generation

(2) Solar energy generation set

(3)Training workbench: aluminum structure

(4) Single solar energy cell plate:

(5) Fan technical:

(6) Battery

(7) Work condition:

Temperature-10~+40℃ Temperature≤80℃

Environment air: no corrosivity air, no fuel air,  no large quantity of conductive dust

(8) Power:

3 System introduction

This system can be divided to four part: wind generating electricity system, photovoltaic power

generation system, control system, inverter system . Wind generating electricity system consist of fan,

generator, battery. Photovoltaic power generation system consist of light source, photovoltaic cell plate,

battery. Control system consist of wind and solar complementary controller. Inverter system is made

of frequency inverter and load unit.  

1.Simulate wind generating electricity set: this system select horizontal axis magnet synchronous generator, use fan to simulate wind, through adjust fan position to change wind strength and direction, to test generator effect in the same condition.  

2.Simulator photovoltaic power generation system:this system use 4 pieces of 30W solar energy board,

You can connect in series or in parallel according to different system pressure. Simulate solar light set

consist of two metal halide, it can adjust the relative position with photovoltaic plate, to simulate solar

light position, and demonstration.

3.Battery group: it consist of 4 pieces 12V/40AHseal battery group, you can parallel connect use as

12V200AH system, you can also connect in series as 24V/100AH system, and deep understand battery.

4.Controller hanging box:this hanging box use industrial type charger controller, it can control wind

generator and photovoltaic generator to charge on battery. With LCD display board, you can check

system technical parameter and can set by yourselves. It is with prevent overcharge, over current  

5.Inverter hanging box:adopt 12V/24V voltage intelligent recognize frequency inverter, output voltageis

AC220V, continuously work power is 600W, peak work power is 1000W. Rotary efficiency>90%, low

voltage automatic alarm.  

6. Meter box: it display generator voltage, generator current, charge voltage, charge current, inverter

voltage, inverter current in real time.

3.2 Training workbench

Training workbench use aluminum column structure hold, with universal wheels at bottom, two wheels

are with brake, you can move and fix as your like. Desktop thickness is 25mm high density board,

surface with anti high temperature treatment, equip with three door, with two drawers, the structure is

beautiful.

3.3 Power control panel

(1) Voltage, current output indicator

(2) Equip with power indicator, safety power output terminal.

(3) Inner with AC power source, with short circuit protection function.  

4.Specific characteristics:

  • Battery: 12 volts and 100 amps/hour
  • Frequency: 60 Hertz.
  • Includes: Horizontal axis wind generator, microprocessor regulator, wind protection, electronic torque control, mounting kit and photovoltaic module.
  • Power: 600 Watt.
  • Inverter input voltage: 12 volts in direct current.
  • Inverter output voltage: 230 Volt Additional features.
  • The body of the generator must be made of aluminum and have at least three blades.
  • The alternator must be of the Brushless type with permanent magnets.
  • It must have an output voltage of 12 Vdc in solar panel and wind turbine.
  • The mast of the support must be in stainless steel.
  • Energy produced should be approximately 30 kWh/month with 5.8 mls (13 mph) wind speed.
  • Minimum wind speed for activation must be 3.6 mls (8 mph).
  • Maximum wind speed must be 49.2 mls (110 mph).
  • The peak power corresponding to the maximum radiation must be 115 W.
  • It must have a support mounted on wheels and with adjustable inclination.
  • It must include a charge regulator for photovoltaic panels, with a maximum current of 20 A.
  • An ammeter clamp must be supplied with a voltage range (AC/DC): 0 to 600 V and a current range (AC/DC) : 0 to 200 A.
  • An inverter must be supplied that has a modified sinusoidal output waveform, as well as low battery shutdown and protection against overloads, short circuits and over temperatures.
  • Must include induction with a certified instructor for its operation and maintenance.

5 Experiment list 

(1) Battery feature test:1) electricity technical parameter 2) Battery connect in series and parallel

(2) Charge controller experiment:1) connect inversed protection experiment 2) Controller protection on battery overcharge 3) Controller protection on battery over discharging experiment 4) Anti reverse charge experiment

(3) Simulate wind generating electricity system experiment 

(4) Wind energy charging control experiment

(5) Generator work power test experiment

(6) Photovoltaic battery open circuit voltage test experiment

(7) Photovoltaic battery short circuit current test experiment

(8) Photovoltaic battery work power test experiment  

(9) To test photovoltaic battery different maximum test experiment under different illumination

(10) Photovoltaic battery output feature experiment

(11) Photovoltaic battery charging control principle experiment

(12)Photovoltaic battery anti reverse charging experiment

(13) Photovoltaic battery connect in series and parallel experiment

(14) Inverter basic principle experiment

(15) Simple inverter output waveform test experiment

(16) Photovoltaic battery connect in series and in parallel experiment

(17) Inverter basic principle experiment

(18) Simple inverter output waveform test experiment

(19) Inverter power drive AC load experiment

(20) Wind and solar generator complementary experiment

We will contact you within 1 working day, please pay attention to the email.