- Description
- Inquiry
ZE3719 Wind Energy Trainer with Wind Turbine Didactic Equipment Renewable Training Equipment
1.1 Overview
This training device includes modules such as solar power generation devices, photovoltaic panel power generation devices, inverters, and light-emitting controllers. Through related experiments, you can study the principles of solar and wind power generation, and cultivate students’ corresponding knowledge and skills. It is suitable for vocational and vocational colleges , Secondary vocational school and technical school related professional teaching and skills assessment.
1.2 Features
(1) The training device adopts an aluminum column frame structure, and the power supply is integrated and installed.
(2) The unit circuit hanging box is fully configured and can be used in combination to complete the training content of various courses.
(3) The relevant units can be flexibly added to or deleted from the experimental subjects to meet the needs of different users.
(4) The device has a good safety protection system.
2 Performance parameters
(1) Input power: single-phase AC230V ± 10% 60Hz
(2) Dimensions: Dimensions: Wind power device: 1210mm × 1210mm × 2440mm
Solar power generation device: 1500mm × 1500mm × 2750mm
Training platform size: 1610mm × 800mm × 1350mm
(3) Overall capacity: 100VA
(4) Weight: <100kg
(5) Working conditions:
l Ambient temperature -10 ℃ ～ + 40 ℃
l Relative humidity ＜ 85% （25 ℃）
3 Product composition
3.1 platform
The power box contains the battery box, AC output, measuring instruments, AC power distribution panel, and circuit breaker and emergency stop switch. •
3.2 Wind turbines and photovoltaic panels
Wind turbines will follow the wind direction and be able to turn
Free movement on vertical support
It has a control battery panel with speed and wind direction sensors
Speed sensors is installed in all wind directions
Includes 3 composite shelves with rotor diameter of 1.17m
The range of energy generated is 30kWh / month and the wind speed is 5.8 m / s
Includes ability to start at a wind speed of 3.6m / s
It’s able to work at speeds up to 49.2 m / s
It has microprocessor regulator
12Vcc output tension
Prevent excessive wind
Torque electronic control
Includes stainless steel support bar
3.3 Blower and 600W Solar Simulator
3.4 Main supporting experimental hanging boxes and devices
(1) 1 controller box
(2). 1 sine wave inverter hanging box
Inverter with the following features
Continuous output: 600W
Peak output power: 1200W
Input tension 12Vcc
Output tension 230Vac-50Hz
Output waveform: Sine correction
Stop when battery power is low
Overload, short circuit and overheating protection
(3) 4 instrument boxes
(4) 1 load box
The AC load system it include five 30W lamps, which can be individually connected
Ability to simulate different wind speeds
4 Can complete experimental training projects
- Understanding of solar energy
- Understanding of wind energy
- Wind power training
- Solar power training
- Collection of training data for wind and solar power training
Related Products
Solar Energy Teaching Equipment for Network Operation Renewable Training Equipment
ZE3716 Solar Energy Teaching Equipment for Network Operation Renewable Training Equipment Vocational Training Equipment Electrician Trainer for college, vocational training center, university.
Off-Grid Solar System Teaching Equipment Renewable Training System
SR2107R Off-Grid Solar System Teaching Equipment Renewable Training System for college, university, vocational schools.
Photovoltaic Training Bench Renewable Training Equipment
ZM2128 Photovoltaic Training Bench Renewable Training Equipment Educational Equipment for college, university.
Photovoltaic System Off Grid Trainer Vocational Training Equipment Photovoltaic Generator Training System
SR2109R Photovoltaic System Off Grid Trainer Vocational Training Equipment Photovoltaic Generator Training System for college, vocational training center, university.
Solar Power Generation Experiment Box Renewable Training Equipment
ZM2129 Solar Power Generation Experiment Box Renewable Training Equipment for college, university, vocational schools.
Photovoltaic power generator Teaching Equipment Solar And Wind Training System
ZM2152 Photovoltaic power generator Teaching Equipment Solar And Wind Training System for college, vocational training center, university.
SR2106 Solar Thermal Energy Trainer Heat Pump Trainer Teaching Equipment
SR2106 Solar Thermal Energy Trainer Heat Pump Trainer Teaching Equipment
Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading renewable training equipment, photovoltaic trainer, solar energy trainer, wind power generation trainer, Fluid Lab Equipment,air conditioner trainer, refrigeration trainer, Thermal Lab Equipment, Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.
Learing objectives/experiments
Energy balance in combined heating systems for demonstrate hot water production and hearing
Heat transfer in an underfloor heating system
Use of heat source for heat pump systems
Pipes
Lengths(not less than): 10m, 20m, 30m
Material: polytechyene
Wall thickness:2mm
Outer diameter: 16mm
Operating pressure: max 3bar
Tank:
Volume: 200L
Measuring ranges
Temperature: 0..160degree
Flow rate: 0… 1000L/h
Specifications:
A)Evaporator
1.5KW variable load electrical heaters
B)compressor
1HP belt driven type
C)condencer
Water colled by internal cooling heaters
D) Expansion valve
Thermostatically controlled
E)Instrumentations
Pressure for refrigeration cycle, refriget=rant and cooling water flowrates, evaporator and compressor motor power input, and temperature at various locations. Te motor torque is determined by means of a load cell.
F)Safety
Condenser pressure and evaporator heater temperature is limited by automatic cut-outs.Wind Power Generation Training Equipment Renewable Training Equipment
ZM2122 Wind Power Generation Training Equipment Renewable Training Equipment for college, university, vocational schools.
ZM2126 Renewable Training Equipment Solar Power Generation Trainer
ZM2126 Renewable Training Equipment Solar Power Generation Trainer
Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading renewable training equipment, photovoltaic trainer, solar energy trainer, wind power generation trainer, Fluid Lab Equipment,air conditioner trainer, refrigeration trainer, Thermal Lab Equipment, Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.
I. Equipment Overview
1 Introduction
1.1 Overview
This training system simulate demo solar generate electricity process, enable students to
learn solar generate electricity. Solar energy panel is driven by high work power metal
halide. This trainer cultivate students hand on ability, it’s suitable for engineering university,
training institute, technical schools.
1.2 Feature
(1)This trainer use aluminum column structure, with inner integrated measurement meters, there is universal wheels at the bottom, it’s easy to move.
(2) It can do many experiment circuit and components, students can combine them to
different circuit, do different experiments and training content.
(3) Training workbench with safety protection system.
2. Performance parameter
(1) Solar power generation device: full aluminum structure, adjustable photovoltaic panel, boundary dimension is 800mm*800mm*1200mm(length× width× height).
(2) Power box unit: aluminum profile structure, aluminum hanging box , boundary dimension 1080mm×300mm×740mm(length× width× height).
(3) Single solar energy cell plate:
(4) Battery technical specification:
(5) Work condition:
(6) Power:
3. System introduction
This system is consisted of four parts: photovoltaic power generation system, control system and inverter system. The photovoltaic power system is consisted of photovoltaic cell panel and battery. Control system is made up of solar power generation controller. Inverter system is made up of frequency inverter and load unit.
1. Simulative photovoltaic power generation system: this system adopts three pieces of 18V,20W solar panel, it can carry out series and parallel connection according to different system voltage, it can simulate the sunlight location through adjusting the relative location with photovoltaic panel, then it’s easy to simulate demonstration of various sunlight condition. Simulation photovoltaic power generator as shown below.
The output of photovoltaic cell panel connect to connecting box which located in the rear of device, output it through safety terminal. The rated output voltage of single block photovoltaic cell panel is 18V, three pieces of cell panel can operate individual, and it also can operate in parallel.Simulation photovoltaic power generator
Indicator light condition explanation
3.2 Power control panel
(1) Voltage, current output indicator
(2) Equip with power indicator, safety power output terminal.
(3) Inner with AC power source, with short circuit protection function. And students can observe inner power box structure through transparent window.
3.3 Equip components
(1) Controller hanging box 1 piece
(2) Inverter hanging box 1 piece
(3) Meter box hanging box 2 pieces
(4) Terminal load hanging box 2 pieces
(5) 4mm safety electrical connection cable 40 eas
4 Experiment list
(1) Battery feature test:1) electricity technical parameter 2) Battery connect in series and parallel
(2) Charge controller experiment:1) connect inversed protection experiment 2) Controller protection on battery overcharge 3) Controller protection on battery over discharging experiment 4) Anti reverse charge experiment
(3) Generator work power test experiment
(4) Photovoltaic battery open circuit voltage test experiment
(5) Photovoltaic battery short circuit current test experiment
(6) Photovoltaic battery work power test experiment
(7) To test photovoltaic battery different maximum test experiment under different illumination
(8) Photovoltaic battery output feature experiment
(9) Photovoltaic battery charging control principle experiment
(10)Photovoltaic battery anti reverse charging experiment
(11) Photovoltaic battery connect in series and parallel experiment
(12) Inverter basic principle experiment
(13) Simple inverter output waveform test experiment
(14) Photovoltaic battery connect in series and in parallel experiment
(15) Inverter basic principle experiment
(16) Simple inverter output waveform test experiment
(17) Inverter power drive AC load experiment
Simulative wind power generator, this system adopts horizontal shaft permanent magnet synchronous generator, it adopts air-blower to simulate natural wind, air-blower can select three wind speed, this system can simulate the change of wind direction and wind power through changing the speed and location of air-blower, then it can detect the generation effect under the corresponding condition. Simulation wind power generator is as shown below.Simulation wind power generator
As shown above, the left picture is wind power generator, the wind power generator output is three phases AC 12V, output terminal connect to the connection box which located in the underneath of equipment. Right picture is air-blower unit, its power supply is single phase AC 220V，50Hz, when it working, connect the pedestal of two portion together through profile connecting rod. As shown below.Connecting mode of simulation wind power generator
Controller panel picture
Indicator light condition explanation
3.2 Power control panel
(1) Voltage, current output indicator
(2) Equip with power indicator, safety power output terminal.
(3) Inner with AC power source, with short circuit protection function. And students can observe inner power box structure through transparent window.
3.3 Equip components
(1) Controller hanging box 1 piece
(2) Inverter hanging box 1 piece
(3) Meter box hanging box 2 pieces
(4) Terminal load hanging box 2 pieces
(5) 4mm safety electrical connection cable 40 eas
4 Experiment list
(1) Battery feature test:1) electricity technical parameter 2) Battery connect in series and parallel
(2) Charge controller experiment:1) connect inversed protection experiment 2) Controller protection on battery overcharge 3) Controller protection on battery over discharging experiment 4) Anti reverse charge experiment
(3) Simulate wind generating electricity system experiment
(4) Wind energy charging control experiment
(5) Generator work power test experiment
(6) Inverter basic principle experiment
(7) Simple inverter output waveform test experiment
(8) Inverter basic principle experiment
(9) Simple inverter output waveform test experiment
(10) Inverter power drive AC load experimentZM2125 Wind Power Generation Trainer Renewable Training Equipment
ZM2125 Wind Power Generation Training Equipment Renewable Training Equipment
Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading renewable training equipment, photovoltaic trainer, solar energy trainer, wind power generation trainer, Fluid Lab Equipment,air conditioner trainer, refrigeration trainer, Thermal Lab Equipment, Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.
I. Equipment Overview
1 Introduction
1.1 Overview
This training system simulate demo wind generate electricity process, it enable
students to learn wind generate electricity. Wind driven generator is driven by fan. This
trainer cultivate students hand on ability, it’s suitable for engineering university, training
institute, technical schools.
1.2 Feature
(1)This trainer use aluminum column structure, with inner integrated measurement meters, there is universal wheels at the bottom, it’s easy to move.
(2) It can do many experiment circuit and components, students can combine them to
different circuit, do different experiments and training content.
(3) Training workbench with safety protection system.
2. Performance parameter
(1) Wind power generation set: wind power generation is consisted of fan unit and air-blower unit, it adopts aluminum profile structure, the bottom of equipment is with universal wheels, the boundary dimension of fan unit is 800mm*800mm*1500mm(length× width× height), the boundary dimension of air-blower is 800mm*800mm*1500mm(length× width× height).
(2) Power box unit: aluminum profile structure, aluminum hanging box , boundary dimension 1080mm×300mm×740mm(length× width× height).
(3) Fan:
(4) Battery technical specification:
(5) Work condition:
Temperature-10～+40℃
Temperature≤80℃
Environment air: no corrosivity air, no fuel air, no large quantity of conductive dust3. System introduction
This system is consisted of four parts: wind power system, control system and inverter system. The wind power system is consisted of air-blower, generator and battery. Control system is made up of wind power generation controller. Inverter system is made up of frequency inverter and load unit.
Simulative wind power generator, this system adopts horizontal shaft permanent magnet synchronous generator, it adopts air-blower to simulate natural wind, air-blower can select three wind speed, this system can simulate the change of wind direction and wind power through changing the speed and location of air-blower, then it can detect the generation effect under the corresponding condition. Simulation wind power generator is as shown below.Simulation wind power generator
As shown above, the left picture is wind power generator, the wind power generator output is three phases AC 12V, output terminal connect to the connection box which located in the underneath of equipment. Right picture is air-blower unit, its power supply is single phase AC 220V，50Hz, when it working, connect the pedestal of two portion together through profile connecting rod. As shown below.
Connecting mode of simulation wind power generator
Controller panel picture
Indicator light condition explanation3.2 Power control panel
(1) Voltage, current output indicator
(2) Equip with power indicator, safety power output terminal.
(3) Inner with AC power source, with short circuit protection function. And students can observe inner power box structure through transparent window.4 Experiment list
(1) Battery feature test:1) electricity technical parameter 2) Battery connect in series and parallel
(2) Charge controller experiment:1) connect inversed protection experiment 2) Controller protection on battery overcharge 3) Controller protection on battery over discharging experiment 4) Anti reverse charge experiment
(3) Simulate wind generating electricity system experiment
(4) Wind energy charging control experiment
(5) Generator work power test experiment
(6) Inverter basic principle experiment
(7) Simple inverter output waveform test experiment
(8) Inverter basic principle experiment
(9) Simple inverter output waveform test experiment
(10) Inverter power drive AC load experiment
