TB20230308R-009 Computer Controlled Wind Energy Basic Unit, with Software Teaching Equipment

TB20230308R-009 Computer Controlled Wind Energy Basic Unit, with Software

Fundamentals Of Wind Power Plants Aerogenerator :

The safety turbine is a simple injection model that joins the ends of up to six air blades.

Learning Objectives

* Setup of small wind power systems

* Setup of off-grid systems

* Physical principles

* Setup and commissioning of a small wind turbine

* Changing wind forces

* Energy storage

* Setup of an off-grid system for generating 230V AC

* Hybrid systems for self-sufficient energy supply

1. Board

1.1. Small wind power system

Wind turbine with 3-phase induction motor for wind simulation, mounted on a supporting base Technical data :

– Wind simulation motor: P max. 1kW

– Small wind turbine: max. 150W/12V DC

– Connecting lines with system plugs

The small wind power system can easily be integrated in other DC off-grid systems.

1.2. Wind Power Board

for controlling the induction motor on the Small Wind Power System To connect the wind turbine, a diversion load controller is integrated providing a display for configuration and diagnostics of the system.

A system software furnishes the values for wind speed, rotating speed, power and torque.

Technical data :

Wind simulator control 1kW

– LCD display of wind speed

– Potentiometer for setting the wind speed

– USB interface for communication with the PC Diversion load controller: Pmax : 500W

– Measuring instrument for diversion controller displaying battery voltage, diversion load, current, power

System connections for Wind Power System 4mm connections for consumers and battery

1.3. Battery Board

Experimenting Board in A4 format

In off-grid PV systems, lead-acid batteries are used for energy storage.

The Battery Board is provided with a maintenance-free, sealed lead gel battery.

Features :

Battery, rechargable

– voltage : 12V

– capacity : 7.8Ah

Digital DC power meter indicating U, I and P Overcurrent protection through two protective switches All connections via 4mm safety sockets

1.4. Low Voltage Consumer Board Experimenting Board in A4 format

The Board is mounted with three common consumers of a PV off-grid system for experimental comparison of their power input and energy consumption.

Features : Consumers

– LED lamp 12V DC, 1W

– Halogen lamp 12V DC, 20W

– Compact fluorescent lamp 12V DC, 7W Operating voltage: 12V DC

All connections via 4mm safety sockets Design :

Board with photorealistic, four-colour front panel design. Coloured lines according to colour code. A special coating makes the panel surface scratch-proof. Didactic standard labelling with operating instructions and connection possibilities facilitate commissioning by the user.

• Off-Grid Inverter Board Experimenting Board in A4 format

The Board is provided with a galvanically isolated inverter which converts 12V DC voltage into sine-wave AC voltage

of 230V/50Hz allowing to operate even sensitive electric devices.

A single-phase power meter integrated on the AC side monitors the electric parameters.

Features :

Inverter

outpu voltage: 230V / 50Hz

2. output power at 230V/50Hz: 250W
3. operating voltage: 12V DC Power meter, displaying

• voltage
• current
• active, reactive and apparent power
• power factor
• energy consumption, Wh

All connections via 4mm safety sockets

• Bulb Socket Board Experimenting Board in A4 format for experiments with lamps Technical data:
• 3 sockets for consumers (E27)
• Power supply via 4 mm safety sockets, separately for

each consumer.

• 3 on/off switches
• Operation voltage/frequency: 230V; 50Hz

2. Didactic material

• Wind Generator
• Battery Board
• Low Voltage Consumer Board
• Off-Grid Inverter Board

4. Connection

4.1. Set of safety measuring leads, 4 mm; 42 parts

5. Set of lamps for Bulb Socket Board : 3 energy saving lamps, 230V 6W

3 halogen lamps 230V 28W 1 LED lamp 230V 6W

6. Manual Instruction.

6.1. Student manual, incl. CD-ROM

“Small Wind Turbines for stand-alone operation”

6.2. Instructor’s manual, incl. CD-ROM

“Small Wind Turbines for stand-alone operation”

Included : Frame and Table Computer

– Processor : min.i5

– RAM : 8GB

– SSD : min. 240GB

– DVD RW

– VGA : Nvidia 2GB

– Display : 19″

– OS : Windows 10

Supplied including:

1. Standard Accessories