training panel function of gas heater Thermal Training Equipment
SR3013 training panel function of gas heater Thermal Training Equipment Heat Transfer Trainer Panel for college, university.
Forces air gas burner training panel Vocational Training Equipment Technical Training Equipment
Forces air gas burner training panel Vocational Training Equipment Technical Training Equipment for college, university.
Domestic Gas Supply Training Panel Vocational Training Equipment Heat Transfer Trainer
Domestic Gas Supply Training Panel Vocational Training Equipment Heat Transfer Trainer for college, university, vocational training equipment.
Hydronic balancing of radiators, Technical Teaching Equipment, Heat Transfer Training Panel
SR3010 Hydronic balancing of radiators, Technical Teaching Equipment, Heat Transfer Training Panel for college, university.
Hydronic balancing of radiators Technical Training Equipment Thermal Trainer
SR3009 Hydronic balancing of radiators Technical Training Equipment Thermal Trainer for college, university.
Radiator training panel heat transfer trainer thermal lab equipment
SR3008 Radiator training panel heat transfer trainer thermal lab equipment for college, university, vocational schools.
Expansion vessel training panel Vocational Training Equipment
SR3007 Expansion vessel training panel Vocational Training Equipment Teaching Equipment for college, university.
Four way mixing valve training panel Educational Equipment Teaching Equipment
SR3006 Four way mixing valve training panel Educational Equipment Teaching Equipment for college, university.
Installation technology: losses in a pipe system Educational Equipment
SR3005 Installation technology: losses in a pipe system Technical Training Equipment Educational Equipment for college, university, technical schools.
Dead Weight Pressure Gauge Calibrator Vocational Training Equipment Fluid Mechanics Lab Equipment
Dead Weight Pressure Gauge Calibrator Vocational Training Equipment Fluid Mechanics Lab Equipment for college, university, vocational training centers.
Automatic Sorting Robot Trainer Vocational Training Equipment Teaching Equipment
ZM3202 Automatic Sorting Robot Trainer Vocational Training Equipment Teaching Equipment
Picture is only for reference, we supply as technical data
(1) Functions:
A. Its portable size makes it easy to carry out experiments on lab table.
B. The status of input and output signals are monitored and displayed on nearby status LED.
C. Easy cabling-using one single flat cable to connect dsPIC Microcontroller Unit.
(2) dsPIC Microcontroller Unit
A. Functions:
(a) This unit includes a dsPIC30F4011 chip and peripheral I/O circuits, which is very helpful to understand the knowledge related with microprocessor control.
(b) The trainer is protected by a suitcase for easy carrying and storage.
(c) The pins of MCU are protected by photo coupler.
(d) Able to use either TACT or Slide switch as signal input.
MCU : dsPIC30F4011(ISP circuit included)
(a) 6-Bit digital signal controller
(b) 40 Pins or above
(c) 48K byte program memory or above
(d) 2K byte RAM or aljove AC power switch
Reset TACT switch MCU Power LED Input :
(a) TACT switch x14
(b) Slide switch x14
(c) Indicator LED x14
(d) Photocoupler IC x14 Output:
(a) Indicator LED x10
(b) Photocoupler IC x10 Power
(a) input: minimum AC90~264V, 47~63Hz
(b) output :minimum DC 5V/2.5A, DC 3.3V/2.5A, 24V/2A
(3) Automatic Sorting Robot
A. Functions:
(a) Suitable for MCU beginners
(b) Systematic training for trainees
(c) Abundant experimental practices
(d) Widespread control applications
(e) DC motor control, various sensors, pneumatic cylinder control, position control and detection for sliding table, C code programming practice
B. Conveyor module
(a) DC motor control
C. Pick & place robot module
(a) X-Axis DC motor drive
(b) Z-Axis cylinder
(c) R-Axis cylinder
(d) Vacuum generator
(e) 3- slot storing station
(f) Transfer slide
D. Control panel
(a) DC power input: minimum DC 24V
(b) Digital input: 13 or above
(c) Digital output: 7 or above
(d) Extension I/O interface : 40 pins or above
(e) Emergency stop button
E. Module contents :
(a) Belt-conveyor:
i. Driver: minimum DC 24V motor
(b) Sensors:
i. Position sensors, color sensor, metal detector
(c) Sliding table:
i. Driver: minimum DC24V motor
(d) Three-axel handling robot:
i. Pneumatic cylinders,
vacuum generator, Vacuum sucker
(e) Electromagnetic valve :
i. 5/2 way single coil x 2, 5/2 1 way double coil x 1,working
voltage minimum 24V
F. Accessories
(a) 6mm Pneumatic Tube
(b) Three kinds of work piece
(c) 40-pin or above Flat Cable x 1
(d) Experiment Manual
(e) MPLAB IDE Software
G. Air Compressor
(a) Air tank 25L 土 10%
(b) Max. pressure : 10kg/cm2
(c) Flow rate : 90 L/min 士 10%
H. PICkit™3 Programmer
1. Air Supply Unit
(1) 1 HP 10 220 VAC, with 88L ±10% air tank
(2) Flow rate: 185 L/min 土 10%
(3) Max. Pressure: 10 kg/cm2
(4) Include air hose diameter 5x8mm connect to Air Service Unit
Required documents: Manufacturer’s Authorization Letter with contact details and Catalog stating with technical specifications
Warranty: 1 (One) year with servicesSwitch Gear Protection Trainer Vocational Training Equipment Educational Equipment
ZE3231 Switch Gear Protection Trainer Vocational Training Equipment Educational Equipment
Picture is only for reference, we supply as technical data
Voltage / over voltage protection relay Excitation voltage: 180-240 V
Input voltage (Under/over range): 100-300V Adjustable Current handling capacity: 0-5 A Frequency: 45-60 Hz
All terminals are on front plate. Use for educational experiment purpose.
Under current / over current protection relay with auto re- clCsureExcitation voltage: 180-240 V Under current / over current range: 0-10 A Adjustable Voltage handling capacity: 150-300 V Frequency: 45-60 Hz
All terminals are on front plate. Use for educational experiment purpose.
Under frequency / over • frequency protection relay Excitation voltage: 180-240 V Under frequency / over frequency range: 35-60 Hz Adjustable Voltage handling capacity: 150-300 V
Current handling capacity: 0-5 A
All terminals are on front plate. Use for educational experiment purpose.
Auto Re-closer : 1-0, 230 V, 2 A, 50 Hz, Reclosing Duration : 5-180 Seconds adjustable, Reclose times : 2-10 Adjustable.
All terminals are on front plate. Use for educational experiment purpose :
3- O, 415 V, 3 A, 50 Hz
All terminals are on front plate. Use for educational experiment purpose
Excitation voltage: 180-240 V. 1-0, 230 V, Temperature 10°C-100°C Main Bus 3- cp, 415 V, 10 A, 50 Hz.
All terminals are on front plate. Use for educational
experiment purpose.
3-<|), 415V, 5A All terminals are on front plate.
Use for educational experiment purpose.
All terminals are on front plate. Use for educational experiment purpose
3- O, 415 volt, 5 Amp, 50 Hz
All terminals are on front plate. Use for educational
experiment purpose.
190W, 1380 rpm.400V, 0.7A, 30, 50 Hz, Copper conductor, SS shaft, Aluminum yoke,
All terminals are on front plate. Use for educational experiment purpose.
DC
Motor/Generator Motor Rating: minimum 200V DC, 1.5A, 200W, 1500 rpm Shunt field rheostat (for speed control)
Generator Rating: minimum 150V DC, 0.75A, Shunt field rheostat (for voltage control) Prime mover speed 1500rpm. Copper conductor, SS shaft,
All terminals are on front plate. Use for educational experiment purpose.
Synchronou Motor/ Generator
DC Excitation in rotor circuit winding type: Lap winding, single layer.
Motor Rating: 3 Phase, 415V, 0.5A, 190W, 50 Hz, 1500 rpm or above, Generator Rating: 3 Phase, 415Volt, 172VA, 0.25A, 50Hz, 1500 rpm or above. Copper conductor, SS shaft, Aluminum yoke,
All terminals are on front plate. Use for educational experiment purpose.
Power supply. AC 3 Phase, 4 Wire, Fixed 415V, 230 V 10A, Variable 0- 415V, 4A, DC Fixed: 240V, 10mp or above, Variable 0- 240V, 5A or above All terminals are on front plate, Use for educational experiment purpose.
Mobile work station Wheel mounted, one double size, four full size, three half size module cabinet, One door cabinet with lock, Auto release & sliding tray, Dimension: H x W x D= minimum 60 inch x 36 inch x 21 inch
Supply and installation of Laboratory equipment for Mechanical Technology, Electrical Technology & Automatic Bottle Filling, Labelingn Capping Machine
Use for educational experiment purpose.
Cable length minimum 01 yds. With both & Staking plugs 25 pcs or above.
- Home
- Products
- Electrical Training Equipment
- Mechatronics Training Equipment
- Refrigeration Training Equipment
- Air Conditioner Trainer
- Fluid Mechanics Teaching Equipment
- Thermal Training Equipment
- Hydraulic Training Workbench
- Pneumatic Training Equipment
- Renewable Training Equipment
- Building Automation Trainer
- Microwave Antenna Trainer
- Vocational Training Equipment
- Food Machine Training Equipment
- PCB Lab Equipment
- About Us
- News
- Contact Us