Two-stage piston compressor teaching aid equipment Heat Transfer Demonstrational Equipment

Two-stage piston compressor teaching aid equipment Heat Transfer Demonstrational Equipment

ST500 Two-stage piston compressor teaching aid equipment Heat Transfer Demonstrational Equipment for college, vocational training center, university. 

  • Description
  • Inquiry

ST500 Two-stage piston compressor teaching aid equipment Heat Transfer Demonstrational Equipment

  1. Description

Compressed air for industry and businesses that use compressed air as an energy source is generated by means of so-called compressed air generation systems. A key component of these systems is the compressor. It converts the supplied mechanical energy into a higher air pressure. Compressed Air generation systems are used to drive machines in mining, for pneumatic control systems in assembly plants or tyre inflation systems at petrol stations.

ST500 includes a complete compressed air generation system with a two-stage compressor and an additional pressure vessel as intercooler. The trainer enables the recording of compressor characteristics and representing the compression process in a p-V diagram.

The air is sucked into the intake vessel through a pressurized nozzle and calmed there before it is compressed in two stages. The additional pressure vessel for intercooling is located between the first and second stage. After the second stage, the compressed air is pressed into another To be a steady state, the compressed air can be released through a blow-off valve with silencer. Safety valves and a pressure switch complete the system.

The measured values ​​can be read on digital displays. The measured values ​​can be read on digital displays.

  1. Technical details

Specification

The characteristic of a two-stage compressor

Piston compressor with 2 cylinders in V-arrangement

Intake vessel with nozzle to measure the intake volumetric flow rate, pressure sensor and additional manometer

Pressure vessel after the first stage as intercooler

Pressure vessel after the second stage with safety valve, blow-off valve and silencer as well as an additional manometer and a pressure switch

Sensors for pressures, temperatures and electric power output

Digital displays for temperatures, pressures, differential pressures and electric power output

Technical data

Compressor

Two-stage

With 2 cylinders in a V-arrangement

Power consumption: 3kW

Speed: 710min-1

Intake capacity: 250L/min

Quantity delivered: 202L/min (at 12bar)

Operating pressure: 12bar, max. 35bar

Intake vessel: 20L

Pressure vessels, 16bar; capacity:

After 1st stage: 5L

After 2nd stage: 20L

Safety valve: 16bar

Measuring ranges

Differential pressure: 0…25mbar

Pressure: 1x 0…1,5bar; 2x 0…16bar

Temperature: 4x 0…200°C

Power: 0…3500W

400V, 50Hz, 3 phases

400V, 60Hz, 3 phases

230V, 60Hz, 3 phases

UL/CSA optional

Required for operation(price didn’t contain PC, you should buy in local)

PC with Windows recommended

We will contact you within 1 working day, please pay attention to the email.