TB20230308R-002 Control Hydraulic Trainer (Single Side) Teaching Equipment

TB20230308R-002 Control Hydraulic Trainer (Single Side) Teaching Equipment

TB20230308R-002 Control Hydraulic Trainer (Single Side) Teaching Equipment

  • Description
  • Inquiry

TB20230308R-002 Control Hydraulic Trainer (Single Side)

 

Features:

The training equipment covers the hydraulic drive, transmission relay control, PLC automatic control, sensor application technology and other technical fields,

which integrates hydraulic transmission technology and various modern control technology.

Technical Specification :

– Power part : with leakage protection function, the power will be disconnected automatically due to wiring error and short circuit is caused

– The supply voltage : three-phase five-wire AC 380 V ± 5%, 50Hz;

control voltage: DC24V / +12 V

– Machine capacity : approx. 1 kVA

– Working temperature : -5 ℃ ~ 40 ℃

– Working humidity : approx. 90% (40 ℃)

Configuration :

1 set training bench approx. 1600x650x1800 mm min. 1 set Three phase power module approx. 300×280×100 mm

min. 1 set button module approx. 300×280×100 mm

min. 1 set Intermediate relay module approx. 300×280×100 mm min. 1 set Oil pump control module approx.

300×280×100 mm min. 1 set PLC module approx. 300×280×100 mm

min. 1 pcs Programming cable match with PLC

min. 1 pcs COM port extension line approx. 1500 mm min. 1 pcs Power cable

min. 1 set Industrial oil pump

min. 1 pcs Oil pump power cable approx. 2m min. 1 pack Safety plug cable

min. 1 set Oil tube 8 drift diameter 2 pcs Oil tube 13 drift diameter

1 set Hydraulic components as follows : Double-acting hydro-cylinder (2 pcs)

– Max. Travel :100 mm

– Cylinder diameter :approx. 50 mm

– Related pressure : approx. 7 Mpa

– Voltage : approx. 16 MPa

– Lowest start pressure : approx. 0.3 MPa

Single –acting oil –cylinde (1 pcs)

– Max. travel:50mm

– Cylinder diameter :approx. 40 mm

– Related pressure : approx. 7 Mpa

– Voltage :approx. 16 MPa

– Lowest start pressure :approx. 0.6 MPa

Single way throttle valve (2 pcs)

– Drift diameter : approx. 10 mm

– Max. working pressure : approx. 35 Mpa

– Flow range : approx. 0-50 L/Min

Check valve (2 pcs)

– Drift diameter :approx. 10 mm

– Max. working pressure : approx. 31.5 Mpa

– Min. start differential pressure : appro . 0,05 MPa, If flow speed =6m/s, Q=30L/Min

Hydraulic control check valve (min. 2 pcs)

– Drift diameter :approx. 10 mm

– Max. working pressure :approx. 31.5 Mpa

– Min. start pressure :approx. 0.25 Mpa

– Control pressure : approx. 0.5-31.5MPa. If flow speed

=6m/s, Q=30L/Min

Relief valve/direct acting (min. 2 pcs)

– Drift diameter :approx. 6 mm

– Max.back pressure : approx. 31.5 Mpa

– Min. Start differential pressure :approx. 0.5 MPa

Relief valve/pilot (min. 1 pcs)

– Drift diameter :approx. 10mm

– Max.back pressure :approx. 31.5 Mpa

– Min. start differential pressure:approx. 0.5 Mpa

– Max. control pressure : approx. 31.5 Mpa

Single way sequence valve (2 pcs)

– Drift diameter :approx. 10 mm

– Max. working pressure :approx. 31.5 Mpa

– Min. Start differential pressure :approx. 0.5 Mpa

Single way speed control valve (min. 2 pcs)

– Related flow :approx. 15 L/Min

– Max. working pressure:approx. 21 Mpa

– Effect of temperature and pressure : approx. in range 2%- 5%

Pressure reducing valve (min. 1 pcs)

– Drift diameter : approx. 10 mm

– Max. working pressure : approx. 35 Mpa

– Outlet pressure range :approx. 1-35 Mpa

Two position three way solenoid directional valve (min. 1 pcs)

– Drift diameter : approx. 6 mm

– Working pressure:approx. 31.5 Mpa Normally open , 24V control

Two position four way solenoid directional valve (min. 2 pcs)

– Drift diameter : approx. 6 mm

– Working pressure : approx. 31.5 Mpa

– 24V control Single electromagnet

Three position four way solenoid directional valve/O (min. 1 pcs)

– Drift diameter : approx. 6 mm

– Working pressure : approx. 31.5 Mpa

– M type medium function, 24Vcontrol double electromagnet

Three position four way solenoid directional valve/H (min. 1 pcs)

– Drift diameter : approx. 6 mm

– Working pressure : approx. 31.5 Mpa

– M type medium function, 24V control double electromagnet

Three position four way solenoid directional valve/M (min. 1 pcs)

– Drift diameter : approx. 6 mm

– Working pressure : approx. 31.5 Mpa

– M type medium function, 24V control double electromagnet

Three position four way solenoid directional valve/P (min. 1 pcs)

– Drift diameter :approx. 6 mm

– Working pressure:approx. 31.5 Mpa

– M type medium function, 24V control double electromagnet

Three position four way solenoid directional valve/Y (min. 1 pcs)

– Drift diameter :approx. 6 mm

– Working pressure :approx. 31.5 Mpa

– M type medium function, 24V control double electromagnet

Three position four way manual directional valve (min. 1 pcs)

– Drift diameter :approx. 6 mm

– Working pressure :approx. 31.5 Mpa

– Valve core function : M type

– Handle control with internal positioner Pressure relay (min. 1 pcs)

– With 24VLED display

– Max. pressure setting : 10Mpa Min. pressure setting : 0.1Mpa Related

– Voltage :approx. 10 Mpa

Tee (min. 4 pcs)

– Model:approx. 50×30×30 mm

– Drift diameter : approx.6 mm

– Working pressure:approx.7 Mpa

– Max. pressure :approx.31.5 Mpa

System unloading valve (min. 1 pcs)

Glycerine pressure gauge range 0-10MPa (min. 4 pcs) High pressure oil rubber hose (min. 6 pcs)

– Model :10-1-25.6Mpa

– Length :approx. 60cm

High pressure oil rubber hose (min. 8 pcs)

– Model :10-1-25.6Mpa

– Length :approx. 80cm

High pressure oil rubber hose (min. 8 pcs)

– Model :10-1-25.6Mpa

– Length :approx. 120cm

High pressure oil rubber hose (min. 2 pcs)

– Model :10-1-25.6Mpa,

– Length:approx. 150cm

Transparent oil hose, inner diameter approx. 10mm (1 meter)

Suppied including:

– Standard accessories

 

We will contact you within 1 working day, please pay attention to the email.