PLC Mounted in Box Vocational Training Tools And Equipment Electrical Engineering Training Equipment

PLC Mounted in Box Vocational Training Tools And Equipment Electrical Engineering Training Equipment

SS3103T PLC Mounted in Box Vocational Training Tools And Equipment Electrical Engineering Training Equipment for college, vocational training center, university. 

  • Description
  • Inquiry

SS3103T PLC Mounted in Box Vocational Training Tools And Equipment Electrical Engineering Training Equipment

  1. Product Overview

1.1 Overview

The training device is the Siemens SMART SR20 PLC module. Through the relevant experiments, you can be familiar with the basic use and programming methods of Siemens SMART PLC, the use of programming software. Cultivate students’ corresponding knowledge and skills, suitable for higher vocational, higher vocational, secondary vocational schools and technical and vocational schools related teaching and skills training assessment.

 

1.2 Features

(1) Standard modular unit hanging box, PLC embedded installation.

(2) Input and output of the PLC module All the terminals are led out to the panel through the adapter terminal, and connected using the K2 test line.

(3) PLC module selects Siemens SMART SR20 module and EM AM06 module, provides 12 digital input, 8 relay output, 4 analog input, 2 analog output, support memory card.

(4) The PLC input can simulate the digital input state through the switch operation.

(5) LED light indicates the output status.

  1. Performance parameters

(1) Input power: single-phase three-wire system 220V±10% 50Hz

(2) Dimensions: 297mm × 430mm × 80mm

(3) Machine capacity: <1KVA

(4) Weight: <100kg

(5) Working conditions: ambient temperature -10 ° C ~ +40 ° C Relative humidity <85% (25 ° C)

  1. Product composition

(1): Module digital input

(2): EM AM06 module analog input

(3): PNP type metal sensor (2 sets)

(4): Voltage analog signal DC 0-10V output

(5): Total power supply

(6): PLC relay output

(7): EM AM06 module analog output

(8): PLC module

(9): PLC DC 24V output

(10): DC24V relay (2 groups)

(11): Current analog signal DC 4-20mA output

3.1 Module digital input

The module contains 12 digital inputs, each with a switch analog digital input state.

3.2 Module Relay Output

The module contains 8 relay outputs, each with an LED indicator to indicate the relay output status.

3.3 Module Analog Input

The module contains 4 analog input points for voltage analog or current analog signals.

3.4 Module analog output

The module contains 2 analog input points for outputting analog signals.

3.5 Total power supply

The module power supply is AC220V input, and the built-in DC24V power supply supplies power to the PLC. Power outlets with switches and fuses are safe and reliable.

3.6 PLC module

The module contains PLC module using Siemens SMART SR20 module and EM AM06 module, providing 12 digital input, 8 relay output, 4 analog input, 2 analog output, support memory card.

3.7 PLC DC 24V output

The module contains two sets of PLC output DC24V power supplies.

3.8 PNP type metal sensor (2 sets)

The module contains two sets of PNP-type metal sensors that, when metal is detected, emit a signal that can be used as a PLC input signal.

3.9 DC24V Relay (2 sets)

The module contains two sets of DC24V relays (2 sets), which can be used as PLC external actuators.

3.10 voltage analog signal DC 0-10V output

The module contains a set of DC 0-10V DC voltage analog signal, which can be used as PLC DC voltage analog input signal.

3.11 Current Analog Signal DC 4-20mA Output

The module contains a set of DC 4-20mA DC current analog signal, which can be used as PLC DC current analog input signal.

3.12 Companion devices

(1) USB communication line 1 piece

(2) PLC programming software CD 1 piece

(3) 10A fuses 10 pieces

(4) 1 yellow indicator light, 1 green indicator light, 1 red indicator light

(5) English manual 1 piece

(6) 2mm test line 25 pieces

(7) 2mm terminals 3 pieces

  1. Can complete the training content

(1) Computer and PLC communication and programming training

(2) Computer monitoring PLC status training

(3) PLC analog input training

Contact Us