Thermal Training Equipment

  • Read More

    Central Geo Thermal Heating System Thermal Experiment Equipment

    ZF1122B Central Geo Thermal Heating System Thermal Experiment Equipment
    “Specification
    Function and operating behaviors of a modern heating system with digital heating controller
    • Four-way mixer and three-way mixer
    • Electric boiler
    • 2 circulating pumps, 1 domestic water pump
    • 4 different radiators and additional plate heat exchanger with shower system as domestic water consumer
    • Colored pipes indicate heating feed and return
    • Measurement of temperature, pressure and flow rate
    • Boiler, 4 stages: 6/9/12/15kW,
    • Max. Feed temperature: 95°C,
    • Water tank capacity: 16 ltr
    • Circulating pump 3 stages: 60W,
    • Max. Flow rate: 60ltr/min,
    • Max. Head: 4m
    • Domestic water pump: 20W, max. 640ltr/h, max. 0.14bar
    • Plate heat exchanger: 3kW, 10 plates
    • Measuring ranges: temperature: 3x 20…120°C / 2x 0…120°C / 2x 0…100°C / 4x 0…80°C, pressure: 8x 0…2.5bar, flow rate: 100…1000ltr/h, water meter: 2.5m³/h
    “• Manual with theory and experiments
    • Size(LxWxH): 1500x900x1700mm
    • Weight: 300Kg
    a. Heat pump system
    b. Compressor : 1HP
    c. Condenser : Air-cooled type
    d. Evaporator: pin, Tube air-cooled type
    e. Evaporator
    f. Expansion Valve : manual type
    g. Liquid receiver : 1/2HP
    h. Accumulator : 1HP
    i. Electronic valve : 3/8” nut clamp type
    j. Manometer
    k. Fitting nipple
    l. Sight Glass
    m. Electric control module: DC24V
    n. Thermostat range: -50℃‾100℃
    o. Geothermal system
    -Ground unit chamber
    -Water unit chamber
    Brand: Shouldshine
    Model:ZF1122B

  • Read More

    Fitting Loss Training Panel Educational Equipment Vocational Training Equipment

    ZF1119A Fitting Loss Training Panel Educational Equipment Vocational Training Equipment
    Specification
    Training panel for investigating the pressure losses in pipe fittings such as elbows and bends
    4different measuring sections, measured length of each section 2300mm, 10 elbows/bends
    Pressure measurement with annular chambers with electronic differential pressure gauge
    Flow rate measurement with Rota meter
    Hose connections made using quick action coupling
    Water feed via pressure reducer
    Cold water connection
    Differential pressure gauge with bleed – measuring range: 0…2000mbar – supply: 9V, battery-operated
    Rota meter: measuring range 150…1600ltr/h
    Outlet pressure at pressure reducer: 0.5…2bar
    Pipe sections: measured length: 2300mm – Pipe section 1: steel, bend
    1/2″, 90° bend – Pipe section 3: copper 18x1mm, 90° elbow – Pipe section 4: copper 18x1mm, 90° bend
    Pipe and Fittings
    7mm bore test section
    13.6mm bore test section
    13.6mm bore test section with four bends
    13.6mm bore test section with four elbows
    13.6mm bore test section with ball valve
    13.6mm bore test section with angle seated valve
    Expeirmental Capabilities
    Determination of pressure drop across various pipes and fittings at differnet flow rates
    Flow rate/diameter relationship determination for flid flow in pipes
    Estimation of loss coefficient (K) for various pipes, pipe fitting and valve settings
    Friction Factor determination for fluid flow in smooth pipes
    Brand: Shouldshine
    Model:ZF1119A

  • Read More

    Radiator Training Panel Vocational Training Equipment Thermal Trainer

    ZA1118A Radiator Training Panel Vocational Training Equipment Thermal Trainer
    Description
    The panel contains a pipe system with four radiators. Each radiator has an air bleed, a thermostatic valve and lockshield valve.
    Rotameters indicate the flow rate through each individual radiator and for the entire system. Connections for cooling water make it possible to dissipate the heat supplied by the hot water. All water connections are made using quick-release couplings.
    Training panel on heating systems and plumbing
    •4 radiators with thermostatic valve, air bleed and adjustable lock shield valve
    • 5 Rota meters
    • 2 water connections for boiler DN15
    • 2 cooling water connections DN15
    • Water connections made using quick action hose couplings
    • Hot and cold water supply
    •Rota meters: 1x 1000ltr/h 4x 300ltr/h
    • Radiator: plate heat exchanger with 10 plates, capacity: 3kW
    Brand: Shouldshine
    Model:ZF1118A

  • Read More

    Valves loss training panel Thermal Training Panel Didactic Equipment

    ZF1120A Valves loss training panel Thermal Training Panel Didactic Equipment for college, university, vocational training centers.

  • Read More

    Trainer for Various Heat Exchangers Thermal Lab Equipment Educational Equipment

    ZF1115A Trainer for Various Heat Exchangers Thermal Lab Equipment Educational Equipment
    Specification
    [1] examination and comparison of various heat exchanger types
    [2] five different types of heat exchangers included in the scope of delivery
    [3] finned heat exchanger with fan
    [4] operating mode (parallel flow or counter flow) selectable via valves
    [5] flow rates adjustable via valves
    [6] electromagnetic flow meter
    [7] digital displays for temperature, pressure differences and flow rate
    [8] hot & cold water benches available for
    independent operation
    [9] water/steam heat exchanger unit and electrical steam
    Generator available for further experiments
    [10] software for data acquisition via USB under Windows Vista or
    Windows 7
    Technical Data
    Plate heat exchanger, 10 plates
    – heat transfer surface area: approx. 0,26m²
    – capacity: 15kW
    Tubular heat exchanger
    – heat transfer surface area: 0,1m²
    – heat transfer surface area (coil): 0,17m²
    Shell and tube heat exchanger
    – capacity: 13kW
    Finned cross-flow heat exchanger
    – heat transfer surface area: approx. 2,8m²
    – max. flow rate fan: 780m³/h
    – max. pressure difference fan: 430Pa
    Jacketed vessel with stirrer
    – heat transfer surface area (vessel): 0,16m²
    – heat transfer surface area (coil): 0,17m²
    Measuring ranges
    – differential pressure air: 0…10mbar
    – differential pressure water: 0…1000mbar
    – flow rate: 0…3m³/h
    – temperature: 0…100°C
    Dimensions and Weight
    LxWxH: 2010x800x1760mm
    Weight: approx. 300kgBrand: Shouldshine
    Model:ZF1115A

  • Read More

    Pipe Friction Training Panel Thermal Teaching Equipment Educational Equipment

    ZF1117A Pipe Friction Training Panel Thermal Teaching Equipment Educational Equipment
    Brand: Shouldshine
    Model:ZF1117A
    Specification
    [1] investigation of the pipe friction in laminar or turbulent flow on Hydraulic Bench
    [2] transparent tank with overflow ensures constant water inlet pressure in the pipe section for experiments with laminar flow
    [3] water supply via Base Module ( Hydraulic Bench) or via laboratory supply for experiments with turbulent flow
    [4] flow rate adjustment via valves
    [5] twin tube manometer for measurements in laminar flow
    [6] dial-gauge manometer for measurements in turbulent flow
    [7] flow rate determined by base module Hydraulic Bench
    [8] water supply using base module ( Hydraulic Bench) or via laboratory supply
    * Diameter of test pipe : 3.0mm ( Bore)
    * Length of test pipe : 524mm
    * Needle Valve included to regulate flow rate
    length: 1000mm – Pipe section 1: acrylic 20×1.5mm – Pipe section 2: steel 1/2″ –
    Smooth-bore pipes of various diameters Size – 6mm , 10mm, 17mm
    Overall dimensions:
    * Height : 1.05m form the ground level
    * Width : 2.25m
    * Depth : 0.43m
    Test Pipe Diameters:
    The Pipe network should have 90° Bends, 90° elbow,90°T, 45°elbow & Y.
    Sudden enlargement
    Sudden contraction
    Ball Valve
    Gate Valve
    Globe valve
    Inline strainer
    Venturi made of clear acrylic
    orifice palte made of clear acrylic
    Pitot Static tube section made of clear acrylic
    EXPERIMENTAL CAPABILITIES
    Laminar to turbulent flow regimes in pipes
    Energy losses in pipe fittings and bends
    Flow measurement using venturi meter
    Flow measurement using orifice plate
    Use of pitot static tube
    Use of manometers

  • Read More

    Energy Efficiency in Refrigeration Systems Refrigerator Training Equipment

    SR2022 Energy Efficiency in Refrigeration Systems Refrigerator Training Equipment

    Brand: ShouldShine
    Model: SR2022
    Learning Objectives / Experiments
    – Variables affecting energy efficiency
    * controller parameters
    * refrigerant supercooling
    – Interconnected operation of compressors
    – Operation of a multicompressor controller
    – Methods for returning oil in a multicompressor refrigeration system
    – Representation of the thermodynamic cycle in the log p-h diagram

    Specification
    [1] Refrigeration system in multicompressor operation to investigate energy efficiency
    [2] Refrigeration circuit with 3 compressors connected in parallel, condenser, thermostatic expansion valve and coaxial coil heat exchanger as evaporator
    [3] Heat exchanger for refrigerant supercooling can be added via valves
    [4] Glycol-water circuit includes pump and tank with heater serving as cooling load at the evaporator
    [5] Multicompressor controller for the parallel operation of the compressors
    [6] Separation of oil from the refrigerant on the delivery side and return to the intake side of the compressors
    [7] Fan at the condenser with adjustable speed
    [8] LabVIEW software for data acquisition via USB under Windows XP or Windows Vista
    [9] Refrigerant R134a, CFC-free
    Technical Data
    3 compressors
    – refrigeration capacity: each 1584W at -10°C/55°C
    – power consumption: each 1156W at -10°C/55°C
    Condenser with fan
    – capacity: 4100W
    – air flow: 1250m³/h
    Coaxial coil heat exchanger capacity
    – 4kW at ΔT=9K; 0,6m³/h glycol-water mixture
    Glycol-water mixture pump
    – max. flow rate: 5m³/h
    – max. head: 6m
    Heater power: 3kW
    Tank
    – glycol-water mixture: 23L
    – refrigeration circuit receiver: 5,8L
    Measuring ranges
    – temperature: 4x 0…100°C, 4x -100°C…100°C
    – pressure: 1x -1…9bar, 1x -1…24bar
    – flow rate: 1x 1..25L/min
    – compressor power: 0…4995W
    Dimensions and Weight
    l x w x h: 1800x700x1900mm
    Weight: approx. 300kg
    Connections
    400V, 50/60Hz, 3 phases

  • Read More

    losses in a pipe system Vocational Training Equipment Educational Equipment

    SR3005  losses in a pipe system Vocational Training Equipment Educational Equipment
    Brand: ShouldShine
    Model:SR3005
    Learning Objectives / Experiments
    – pressure curve in a closed pipe system with circulation pump
    – influence of pipe diameter, flow velocity, change in
    cross-section and pipe fittings on the pressure losses
    – determination of pump characteristics, system characteristics and the operating point
    Specification
    [1] investigation of the pressure losses at contractions, pipe angles, pipe bends, valves and fittings and pipe elements of different diameter
    [2] pipe elements are commercially standard components in heating and sanitary engineering
    [3] clear panel mounted on a sturdy, movable frame
    [4] closed water circuit with pump and tank
    [5] integrated bleed valve on manometer and in the pipe section
    [6] flow measurement using rotameter
    [7] measurement of the pressure distribution at
    13 pressure measuring points, display with 13 tube manometers
    Technical Data
    Pump – 3 stages – max. flow rate: 4,5m³/h – max. head: 6m
    Tank: approx. 5L
    Measuring range – flow rate: 100…1000L/h – pressure: 1600mmWC
    Dimensions and Weight LxWxH: 1900x700x2020mm Weight: approx. 140kg
    Required for Operation
    230V, 50Hz, 1 phase

  • Read More

    Installation technology losses in pipe bends Technical Teaching Equipment Didactic Equipment

    SR3004 Installation technology losses in pipe bends Technical Teaching Equipment Didactic Equipment
    Brand: ShouldShine
    Model:SR3004
    Learning Objectives / Experiments
    – flow measurement
    – differential pressure measurement
    – effect of flow and surface roughness
    – effect of the flow velocity
    – effect of changes in pipe direction
    Specification
    [1] investigation of the pressure loss at pipe elements with different changes in pipe direction and materials
    [2] pipe elements are commercially standard components in heating and sanitary engineering
    [3] clear panel mounted on a sturdy, movable frame
    [4] simply selection of the measuring sections via hose connection with quick-release couplings
    [5] flow can be adjusted via valves
    [6] flow measurement using rotameter
    [7] differential pressure measurement via differential pressure meter with display
    Technical Data
    Measuring sections: 2300mm
    – pipe section 1: steel, diameter: 1/2″, 90° pipe angle
    – pipe section 2: steel, diameter: 1/2″, 90° pipe bend
    – pipe section 3: copper, diameter: 18x1mm,90° pipe angle
    – pipe section 4: copper, diameter: 18x1mm,90° pipe bend
    Differential pressure meter
    Measuring ranges- flow rate: 150…1600L/h- differential pressure: -350mbar…350mbar
    Dimensions and Weight LxWxH: 1650x700x1850mmWeight: approx. 100kg
    Required for Operation
    Water connection: 1500L/h, drain

  • Read More

    Installation technology losses in different pipes Vocational Training Equipment Didactic Equipment

    SR3003 Installation technology losses in different pipes Vocational Training Equipment Didactic Equipment
    Brand: ShouldShine
    Model:SR3003
    investigation of the pressure losses of flow through pipes
    – measurement of the pressure differential on different pipe sections
    – influence of various pipe diameters
    – influence of different materials and surface roughness
    – effect of the flow velocity
    – comparison between experiment and theory
    Specification
    [1] investigation of friction-induced pressure losses in flow through pipes
    [2] pipe elements are commercially standard components in heating and sanitary engineering
    [3] clear panel mounted on a sturdy, movable frame
    [4] four measuring sections with different pipe crosssections and materials
    [5] pipe sections can be selected via ball valves
    [6] water connections made using quick-release couplings in the inflow and return
    [7] flow can be adjusted via valves
    [8] flow measurement using rotameter
    [9] differential pressure measurement via differential pressure meter with display
    Technical Data
    Pipe sections measuring length: 1000mm
    – pipe section 1: transparent plastic, diameter: 20×1,5mm
    – pipe section 2: steel, diameter: 1/2″
    – pipe section 3: copper, diameter: 18x1mm
    – pipe section 4: copper, diameter: 15x1mm
    Differential pressure meter
    Measuring ranges- flow rate: 150…1600L/h- differential pressure: -350mbar…350mbar
    Dimensions and Weight LxWxH: 1650x700x1850mm Weight: approx. 92kg
    Required for Operation
    Water connection: 1500L/h, drain

  • Read More

    Thermal Expansion Training Panel Educational Equipment Vocational Training Equipment

    SR3002 Thermal Expansion Training Panel Educational Equipment Vocational Training Equipment
    Brand: ShouldShine
    Model:SR3002
    Learning Objectives / Experiments
    – thermal expansion of different materials such as PVC, PE, copper and steel
    – determination of thermal expansion coefficients and the expansion force
    – measurement of pipe elongation
    – effect of varying pipe diameter
    – expansion compensator
    Specification
    [1] investigating the thermal expansion of different pipe sections
    [2] pipe sections can be selected by ball valves
    [3] water connections made using quick-release couplings
    [4] operation with hot and cold water supplies
    [5] adjustment of the water temperature using mixing battery with thermocouple
    [6] temperature measurement using battery-operated digital thermometer
    [7] force measuring device to determine the expansion force
    Technical Data
    Pipe section length: 1000mm
    Nominal diameters- PVC, PE, Cu: – Cu: – Steel: 1/2″
    Mixing battery connection: 1/2″
    Force measuring device
    – spring rate per spring: 78N/mm
    – total spring rate c: 156N/mm
    Measuring range
    – temperature: -50…90°C
    Dimensions and Weight
    LxWxH: 1650x700x1850mm
    Weight: approx. 100kg
    Required for Operation
    Cold and hot water connection

  • Read More

    Heat Transfer Bench Educational Equipment Thermal Training Equipment

    SR1162E Heat Transfer Trainer Heat Transfer Bench Educational Equipment Thermal Training Equipment
    1 Product Overview
    1.1 Profile
    This product is an extensible educational experiment equipment for students to observe the heating, cooling and air movement of the device during operation. Students can observe the mixing of air and conduct tests to monitor temperature and air pressure. Grasp its control principle and control method, cultivate students’ corresponding knowledge and skills, suitable for higher vocational schools, engineering university, secondary vocational school and technical school related professional teaching and skills training evaluation.
    1.2 Feature
    (1) The training platform adopts an aluminum column frame structure with a universal wheel at the bottom for flexible movement. The desktop uses a 25mm thick high-density substrate, and the surface is treated with high-temperature and high-pressure fire-resistant panels. The structure is firm and beautiful. The instrument and power supply are integrated and installed, which is easy to use and not easily damaged.
    (2) The training platform has a good safety protection system.
    2 Technical specifications
    (1) Input Power: AC220V±10% 60Hz
    (2) Fan: Supply voltage: AC220V/50Hz Power: 1.5kW; Maximum flow rate: 2.160m3/h
    (3) Overall dimensions: 2000mm x 750mm x 2100mm
    (4) Overall capacity: <2.5KVA
    (5) Weight: <100kg
    (6) Working conditions: Ambient temperature -10°C to +40°C Relative humidity <85% (25°C)
    3 Product introduction
    3.1 Power control panel
    (1)The power control panel adopts an aluminum alloy frame and a closed box structure, which is integrated with the placement rack below.
    (2)Configured with circuit breaker, power indicator, temperature adjustment knob, thermometer, power socket, differential pressure gauge, thermostat and intelligent electrical parameter measuring instrument
    (3)The power input is controlled by the leakage breaker and the emergency stop control button is provided. In case of emergency, you press emergency stop button is so as to cut off the power.
    3.2 Training workbench
    (1)Training workbench:
    The training table is supported by aluminum pillars, and the bottom universal wheel has a brake that can be moved and positioned flexibly. The desktop uses a 25mm thick high-density substrate, and the surface is treated with high-temperature and high-pressure fire-resistant panels. The structure is firm and beautiful.
    (2) Heat exchange system