Mechatronics Training Equipment

Mechatronics Training Equipment
  • Multi variable regulation bench Process Control Trainer Teaching Equipment

    ZM3198 Multi variable regulation bench Process Control Trainer Teaching Equipment for mechatronics laboratory in college, vocational training centers.

  • PID Trainer with Applications Educational Equipment Didactic Equipment

    ZM2180P PID Trainer with Applications Educational Equipment Didactic Equipment

     

    This training equipment is made of industrial aluminum, it is equipped with stainless steel heating water tank, and it is equipped with various temperature probes and controlling instruments, so it is suitable for temperature measurement and control training.

  • Pneumatic Training Equipment Vocational Training Equipment Educational Equipment

    ZMP2102 Pneumatic Training Equipment Vocational Training Equipment Educational Equipment

    1. Introduction
    Electro pneumatic trainer is designed for “hydraulic and pneumatic training”, it meets modern pneumatic transmission requirement. Students can learn basic pneumatic circuit control knowledge, and practice hand on ability. Pneumatic trainer combines electrical and mechanical transmission knowledge.
    This trainer is suitable for colleges, engineer university, technical schools, vocational schools, engineer training centers, factory training department etc.
    Through this trainer, students can master pneumatic components structure, pneumatic circuit control theory, pneumatic circuit design, and hand on ability for pneumatic trainer.
    This trainer is flexible and students can design their own pneumatic circuit.
    II. Basic structure
    Pneumatic control experiment workbench including experiment workbench, experiment shelf, pneumatic components etc.
    Pneumatic components and real equipment: air filter, decrease pressure valve, service unit, hand-operated direction valve, pneumatic control direction valve, strike valve, check valve, throttle valve, exhaust valve, single acting cylinder, double acting cylinder etc.
    All PLC program software is teaching edition=crack edition=free edition.
    A. Improvement on trainees’ familiarization of the principles and applications of various air pressure components.
    B. Demonstration of air-pressure loop design.
    C. Training of PLC programming,
    including architecture, instructions and ladder diagram. *
    (2) Pneumatic Workbench
    A. It is designed to be flexible to satisfy individual’s needs.
    B. A complete workbench mainly consists of 3 parts :
    (a) Electro-Modules Frame
    (b) Working Board (double side)
    (c) Working Table (single or double side)
    C. The combinations of the workbench can be modified based on different lab requirement.
    D. A complete workbench allows customers to carry out all listed pneumatic experiments. In PART I and PART II, pneumatic components are powered by
    Air Supply Unit and operated on Working Board area through connected Air Hose.
    E. In PART III, the electrical components mounted on Electro-Modules Frame are linked to the pneumatic system through Connecting Lead and powered by Air Supply Unit.
    F. End user are also welcome to adopt Programmable Logic Controller (PLC) for
    implementation of PART III. That means Programmable Logic Controller Trainer is an alternative to Electro-Modules Frame and a corresponding electrical device.
    (3) Electro-Modules Frame (Excluding Electrical Components)
    A. A cabinet frame is available for mounting electrical components on either side.
    B. This steel frame can accommodate up to 15 electro-modules at least.
    C. Size: minimum 1260 mm(W) x 250 mm(D) x 360 mm(H) ±10%
    (4) Working Board
    A. Double-side aluminum grooved panel – minimum 1260 x 750 mm
    B. A working surface up to 1200 x 700 mm
    (5) Working Table
    A. Single-side worktable in size minimum 1300 mm(W) x 700 mm(D) x 850mm(H)±10% Drawer units in steel with one flat drawer and four large
    drawers that can be loaded up to 20 kg per drawer.
    B. Double-side worktable with minimum 1300 mm(W) x 800 mm(D) x 850mm(H)±10%
    Two drawer units in steel with one flat drawer and four large drawers that can be loaded up to 20 kg per drawer. •
    C. The drawers with different rollers that feature an easy-gliding system for smooth running and
    Additional breaking.
    (6) Reed Switch
    A. Operating voltage : minimum 24 VDC
    B. Max. current: 100 mA
    C. Frequency range: 3 – 250 Hz
    (7) Connecting Lead Holder
    A. Mobile type, with 5-foot tubular and 5 casters
    B. Height: minimum 1400 mm, iron plate suitable
    C. with minimum 20 connecting leads slots
    (8) Pneumatic Components
    A. Air Service Unit
    (a) Filter-Regulator-Lubricator (FRL) assembly
    (b) Adjustable pressure: 0 – 9.9 kg/cm2
    (c) Sliding exhaust valve mounted
    (d) Filtration: minimum 40pm
    B. Pressure Gauge
    (a) Operating pressure: 0 -10 kg/cm2
    (b) Gauge size: minimum 1.5 inch.
    C. Air Manifold
    (a) Check connector for 04 plastic tubing 6ea Connector size : 1/4 inch
    (b) Operating pressure: minimum 0-12 kg/cm2
    D. Single-Acting Air Cylinder
    (a) Cylinder internal diameter: minimum 32mm Stroke length : minimum 150 mm
    (b) Operating pressure: 1.6 – 9..0 kg/cm2
    E. Double-Acting Air Cylinder
    (a) Cylinder internal diameter: minimum 32mm Stroke length : minimum 150 mm
    (b) Operating pressure: 0.4 – 9.0 kg/cm2
    (c) Air cushion
    F. 3/2-Way Directional Control Valve
    (a) Single air operated, spring return
    (b) NC type
    (c) Flow rate: minimum 200 l/min
    (d) Operating pressure: 1.5 – 8.0 kg/cm2
    (e) Max, pressure: 10.5 kg/cm2
    G. 5/2-Way Directional Control Valve
    (a) Single air operated, spring return
    (b) Flow rate: 200 l/min
    (c) Operating pressure: 1.5 – 8.0 kg/cm2
    (d) Max. Pressure: 10.5 kg/cm2
    H. 5/2-Way Directional Control Valve
    (a) Double air operated, air return
    (b) Flow rate: minimum 200 l/min
    (c) Operating pressure: 1.5 – 8.0 kg/cm2
    (d) Max. Pressure: 10.5 kg/cm2
    I. 5/2-Way Single-Solenoid Valve
    (a) Solenoid voltage: minimum 24 VDC
    (b) Single solenoid operated, spring return, with LED
    (c) Operating pressure: 1.5 – 8.0 kg/cm2
    (d) Max. Pressure: 10 kg/cm2
    J. 5/2-Way Double-Solenoid Valve
    (a) Solenoid voltage: minimum 24 VDC
    (b) Double solenoid operated, with LED Operating pressure: 1.5 – 8.0 kg/cm2
    (c) Max. Pressure: 10 kg/cm2
    K. 3/2-Way Pushbutton Valve
    (a) Spring return, flat type, NC type
    (b) Operating pressure: 0 – 8 kg/cm2
    (c) Max. Pressure: 10 kg/cm2
    L. 3/2-Way Manual Valve
    (a) Spring return, 2-position selector
    (b) Operating pressure: 0 – 8 kg/cm2
    (c) Max. Pressure: 10 kg/cm2
    M. 3/2-Way Manual Valve
    (a) Spring return, push & lock NO type
    (b) Operating pressure: 0 – 8 kg/cm2
    (c) Max. Pressure: 10 kg/cm2
    N. 5/2-Way Pushbutton Valve
    (a) Spring return, flat type
    (b) Operating pressure: 1.5 – 8.5 kg/cm2
    (c) Max. Pressure: 10 kg/cm2
    O. 3/2-Way Roller Valve
    (a) Unidirectional
    (b) Operating pressure: 0 – 8 kg/cm2
    (c) Max’ pressure: 10 kg/cm2
    P. 3/2-Way Roller Valve
    (a) Bi-directional
    (b) Operating pressure: 0 – 8 kg/cm2
    (c) Max. Pressure: 10 kg/cm2
    Q. OR Valve (Shuttle)
    (a) OR logic
    (b) Operating pressure: 0.2 – 9.9 kg/cm2
    R. AND Valve (Dual-Pressure)
    (a) AND logic
    (b) Operating pressure: 0.2 – 9.9 kg/cm2
    S. Quick-Exhaust Valve
    (a) Pilot type,
    T. One-Way Flow-Control Valve
    (a) Adjust: 10-turn, with speed controller
    U. Sequence Valve
    (a) Operating pressure: 1.5-8 kg/cm2
    V. Time Delay Valve
    (a) Operating pressure: 2 – 8 kg/cm2
    (b) Time delay: 0.1 – 30 sec
    (c) Min. reset time <0.1 sec
    W. Pressure Switch
    (a) Operating pressure: 1.5 kg/cm2
    (b) Max. Voltage/current: 250 VDC/0.25A
    (c) 125 VDC/0.5A
    X. Air Hose
    (a) Inner / outer diameter: 2 mm/4 mm Length : 25 M
    Y. Connecting Lead
    (a) Lead diameter: minimum 4 mm, Length :0.25M, 0.5M.1M
    (b) Color: red, yellow, blue etc. 1 set: 60 pcs or above
    Z. Limit Switch
    (a) Roller lever type
    (b) Contacts: NO, NC.
    AA. 3-Way Distributor
    (a) Connector for 04 plastic tubing 6ea
    (b) Connector size: % inch.
    (9) Electrical Components
    A. DC Power Supply
    (a) Input voltage : 100 – 240VAC/1.7 A Output voltage : minimum 24 VDC/4.2 A
    (b) Terminal: 2 sets for 土 DC output with power I/O indicator
    (c) 2 terminal sets for power output
    B. Pushbutton Switch
    (a) Spring return
    (b) Pushbutton switch with illuminated indicator
    (c) Including NC, NO contacts
    (d) Operation voltage: minimum 24 VDC
    (e) Max. current: 3 A
    C. Relay
    (a) 4 sets of NC, NO, COM contacts
    (b) With LED indicator
    (c) Operation voltage: minimum 24 VDC
    (d) Max. Current: 5 A
    D. Timing Relay
    (a) ON-Delay type
    (b) Operation voltage minimum 24 VDC
    (c) Max. Current: 5 A
    (d) Time delay: 0.05sec – 300 hour multi switch
    (e) 2 sets of NC, NO, COM contacts
    (f) With LED indicator Programmable Logic Controller Trainer
    (1) Functions:
    A. Input-simulation switches function as level and pulse Input for different input signal
    B. It is particularly suitable for installation of output relay helps to increase load current
    C. Easy-to-use, Windows-based development software
    D. Assorted peripheral devices and other devices that support external extensions, it particularly suits
    Laboratory experiment and project implementation.
    E. Various simulations I/O devices for studying and observing the results
    F. Using 4mm safety sockets on Input / Output terminals to ensure users’ safety
    G. The suitcase-design makes it easy to carry, move and store
    (2) AC adapter: Input AC 100〜240V, Output DC 24V
    (3) PLC main unit: SIEMENS SIMATIC S7-224 or others
    (4) Digital input: 14
    (5) Digital output: 10
    (6) Support high-speed counters : 6 (total)
    (7) Support timers : 256 total timers; 4 timers(1 ms); 16 timers(10ms); 236 timers(100ms)
    (8) Communication ports : RS-485 or USB
    (9) Module expansion port and DIO extension port
    (10) Traffic light control module
    (11) Tank-filling device module
    (12) 4-digit 7-segment display
    (13) 4-digit thumbwheel switch
    (14) Step motor
    (15) Encoder
    (16) 24V DC motor
    (17) Proximity sensor
    (18) Micro switch
    (19) Buzzer
    (20) 4×4 keypad
    (21) 24V DC expansion power
    (22) Windows-based programming software (STEP 7- Micro/ WIN) allows the user to modify the program while running it.
    (23) System Requirements
    A. PC with Pentium It or better CPU
    B. Windows 98 / 2000 / XP / Vista / 7
    C. USB / PPI Multi-Master Cable
    D. STEP 7- Micro/WIN software CD
    (24) Accessories
    A. Power Cord
    B. Experiment Manual
    C. Connecting Leads Set

  • Pressure measuring bench Teaching Equipment Educational Equipment

    SS2103 Pressure measuring bench Teaching Equipment Educational Equipment

    I.Overview Description

    The Pressure Training System is a single loop pneumatic control system. It enables the study of the principles of both pressure regulation of a process and the control of flow in a pressurised system.

    The System comprises a low pressure air circuit supported on a panel for use on a benchtop, making it suitable for individual student work or for group demonstration.

  • SR-MPS800 Mechatronics Trainer Vocational Training Equipment

    SR-MPS800 Mechatronics Trainer Vocational Training Equipment. Jinan Should Shine Import And Export Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • SR1500 Industrial Mechatronic System With Seimens S7-1500 PLC

    SR1500 Industrial Mechatronic System With Seimens S7-1500 PLC

    Industrial Mechatronics System with S7-1500PLC MODEL : SR1500

    Modern industry is the integration of computer, information technology, modern management techniques, advanced technology, it covers production design, production preparation, manufacture progress execution and many other contents, and have been one of the important pillars in national construction and also social developments. In order to strengthen the students ability to face the challenges of the society, it is urgent to improve the theoretical level and practical ability of mechatronics, photoelectric sensor, and it has more other experimental platform of mechatronics practical manufacturing systems as an important thing. Our industrial mechatronics system/manufacturing system/modular production is the basis of advanced manufacturing technology which is consist of : 3sets of process stations (Distributing/conveyor station, Assembly station and Sorting/testing station) and 1set of storage station. (each station can be used individually or combined with other configuration).

  • SS2102 Temperature measuring bench Vocational Training Equipment Teaching Equipment

    SS2102 Temperature measuring bench Vocational Training Equipment Teaching Equipment for vocational training centers, for college, for engineering universites, for technical schools.

  • SS3105 Automatic Sorting Trainer ASRS Trainer

    SS3105 Automatic Sorting Trainer ASRS Trainer.

    Jinan Should Shine Import And Export Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • SS606 Modular Product System Mechatronics Training Equipment

    SS606 Modular Product System Mechatronics Training Equipment. Jinan Should Shine Import And Export Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • SS606 Modular Product System Mechatronics Training Equipment Didactic Equipment

    SS606 Modular Product System Mechatronics Training Equipment Didactic Equipment

  • SSMT108 Transparent Hydraulic Excvavtor Trainer Teaching Equipment

    SSMT108 Transparent Hydraulic Excvavtor Trainer Teaching Equipment. Jinan Should Shine Import And Export Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • SSMT109 Hydraulic Excavator Trainer Educational Equipment

    SSMT109 Hydraulic Excavator Trainer Educational Equipment. Jinan Should Shine Import And Export Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.