Electrical Training Equipment

  • AC Circuit Output Module Electronics Trainer Vocational Training Equipment

    SR6102E AC Circuit Output Module Electronics Trainer Vocational Training Equipment
    1 Introduction
    This experimental device can provide ac power supply, the output of circuit breaker and fuse protection, can provide 42V/8A and 380V/1A AC. Configuration of digital voltmeter, voltage commutation switch, digital ammeter, can complete a variety of measurements.
    2.Technical data
    Power supply; output: protected with thermal relays and fuses: 42V AC., 8A, 3 phase (380V AC) 1 A for mains voltage version). Instruments: 3-digit electronic voltmeter, switchable on the three phases; 3-digits electronic ammeter,
    3. Detailed technical data
    1. AC380V total power supply —- -4p leakage circuit breaker.
    1. AC42V/8A power supply — -2p circuit breaker.
    2. Three phase indicator light.
    3. Three-phase insurance
    4. Three-phase five-wire output terminal.
    5. AC42V/8A output terminals and insurance.
    6. AC42V/8A output terminals and insurance.
    7. AC42V/8A output indicator light.
    8. Ac voltmeter –AC500V.
    9. Commutation switch
    10. Ac ammeter -AC8A.
    11. AC500V voltmeter measuring control switch (note: set to the left side, with the use of reversing switch, the internal three-phase power supply can be tested; To the right, use the test line to test the voltage of the external output terminal.
    4. Operate instructions
    1. Carefully check whether there is any safety hazard in the power supply line before power supply. (for example, the copper wire of the insulating layer breaks out and is forbidden to be used; Whether the terminal screws are loose)
    2. Connect the terminals on the power supply wire of the three-phase five-wire system in the laboratory (black, green, red, L1, L2, L3; Blue line zero; Double – color ground wire), power supply to the experimental box.
    3. After the check is correct, power the 4P leakage circuit breaker, and the whole device circuit is connected. If you use AC42V/8A power supply, please power the 2P circuit breaker.
    4. When measuring voltage, dial the voltage meter to the left and cooperate with the reversing switch to test the internal three-phase power supply and determine whether the phase is missing; To the right, use the test line to test the voltage on the external output terminals and the ac voltage on other devices.

  • Servo Breaker Driver Trainer Electrical Training Equipment Educational Equipment

    SR1121S Servo Breaker Driver Trainer Electrical Training Equipment Educational Equipment
    1 Product Overview
    1.1 Profile
    The training device includes DC servo drive, AC servo drive and Siemens Sinamics V20 inverter and encoder. Through experiments, students can familiarize themselves with the characteristics of servo brake and drive system, and master the control principle and control mode. To develop students’ technical skills and knowledge suitable for higher vocational education. Higher vocational education, secondary vocational schools and technical schools related to the teaching and skills training assessment.
    1.2 Feature
    (1) The training platform adopts aluminum profile column frame structure, each unit module is rail-mounted, the module is distinct, easy to use and not easy to damage.
    (2) The equipment is complete, the modules are diverse, and can be used in combination to complete the training content of various courses.
    (3) The training platform has a good safety protection system.
    2 Technical capacity
    (1) Input power: three phases five wires AC380V±10% 50Hz
    (2) External dimension: 1800 mm×400 mm×1200 mm
    (3) Weight: <100kg
    (4) Work condition: environment temperature -10℃~+40℃ relative humidity<85%(25℃)
    (5)Whole capacity:< 2.0 kva
    3 Product consist of
    3.1 Power control module
    3.2 DC 48V power module
    3.3 AC voltage meter
    3.4 AC voltage meter
    3.5 DC voltage meter
    3.6 DC current meter
    3.7 Tachometer(2 sets)
    3.8 Inverter
    3.9 DC driver
    3.10 AC Driver
    3.11 Limit protect module
    3.12 DC servo speed control module
    3.13 AC servo speed control module
    3.14 DC 24V power module
    3.15 Encoder cable
    3.16 AC servo control cable
    3.17 AC servo motor encoder cable
    3.18 AC servo motor power cord
    3.19 DC servo Uart cable
    3.20 DC servo control signal cable
    3.21 DC servo motor power cord
    3.22 Three-phase asynchronous motor
    4 Experiment that can be finished
    4.1 AC servo motor control
    4.2 DC servo motor control
    4.3 Three phases motor control

  • DC Output Module Electrical Training Equipment Vocational Educational Equipment

    SR6114E DC Output Module Electrical Training Equipment Vocational Educational Equipment
    1 Introduction
    This experimental device can provide DC power supply, and output the protection of fuses, which can provide DC 42V/3A, DC 220V/1A, DC 0-36v /3A, DC 0-230v /1A. Configure digital voltmeter DC500V to complete a variety of measurements. Through the experiment, and master the principle and control mode, the corresponding knowledge and skills, suits, higher vocational colleges, secondary vocational schools and vocational school related professional teaching and skills training examination.
    2 Training panel instruction
    1. DC voltage measurement module — -DC 500V.
    2. DC voltage module -DC 42V/3A.
    3. DC voltage module -DC 220V/1A.
    4. Adjustable DC voltage module -DC 0-36v /3A.
    5. Adjustable DC voltage module -DC 0-230v /1A.
    3.Operation instructions
    1. Carefully check whether there is any safety hazard in the power supply line before power supply. (for example, the copper wire of the insulating layer breaks out and is forbidden to be used; Whether the terminal screws are loose)
    2. Plug the power cord into the power outlet on the left side of the device, and turn on the power switch after checking. The four dc voltage modules on the front panel can be used at will.
    3. When measuring voltage, use the 4mm safety electrical cable to connect to the signal input terminal of the dc voltage measurement module.

  • ZE3201 8086 Microprocessor Trainer Vocational Training Equipment Teaching Equipment

    ZE3201 8086 Microprocessor Trainer Vocational Training Equipment Teaching Equipment
    1. 8051 unit
    1) microprocessor: i80c31, its P1 port and P3 mouth are open for users to use.
    2) clock frequency: 6.0MHz
    3) memory: the unified addressing of program memory and data storage can reach up to 64k, and the onboard ROM (monitoring program 27C256) 12k; RAM1 (program memory 6264)8k for user to download the experiment program, can be expanded to 32k; RAM2 (data storage 6264)8k for user program use, can be extended to 32k. (RAM program memory and data storage cannot be expanded to 32k at the same time, specific to manufacturer’s contact). (see figure 1-1: memory organization chart). In the program memory, 0000H– 2FFFH is the monitoring program memory area, the user is not available, 4000H– 5FFFH is the storage area for the user experimental program, for the user to download the experiment program. The range of data storage is: 6000H- 7FFFH for user experiment program.
    Note: due to user experiment program area is located in the 4000 h — — — — — 5 FFFH, users should note when writing experimental programs, the starting address of the program should be 4000 h, the interrupt entry address should be on the basis of the original address, plus the 4000 h. For example, the original interrupt entry for external interrupt 0 is 0003H, and the external interrupt of the user’s experimental program is 4003H, and so on, as shown in table 1-1.
    4) the basic experiment of 8051 can be provided
    In order to improve the quality of computer experiment teaching, improve the efficiency of the experiment, reduce the labor intensity of speaker teachers and experimental teachers, on the experiment of the system board, in addition to the microprocessor, program memory, data memory, also added 8255 parallel interface, serial controller, keyboard, display controller 8279, 8250, 8253 programmable timer, A/D, D/A conversion, single pulse, various frequency of pulse generator, input and output circuit module, each part of the circuit is independent, and flexible combination, can meet all kinds of schools, different levels of microcomputer experiment and training requirements. The available experiments are as follows:
    (1) input and output experiment of 8051P1
    (2) simple extension input and output experiment
    (3) 8051 timer/counter experiment
    (4) and 8051 external interrupt experiment
    (5), 8279 keyboard scanning, LED display experiment
    (6) 8255 parallel port input and output experiment
    (7) 8253 timer/counter experiment
    (8) and 8259 interrupt experiments
    (9) serial port communication experiment
    (10) ADC0809 A/D conversion experiment
    (11) the DAC0832 D/A conversion experiment
    (12) memory expansion experiment
    (13) traffic light control experiment

  • ZF-RF3020B RF Training System 1.0GHz Vocational Training Equipment

    ZF-RF3020B RF Training System 1.0GHz Vocational Training Equipment. Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading Fluid Lab Equipment,air conditioner trainer, refrigeration trainer, Thermal Lab Equipment, Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • SR3103 Emergency Lighting Trainer Vocational Training Equipment

    SR3103 Emergency Lighting Trainer Vocational Training Equipment. Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • SR3102 Stand Alone Generator Set Trainer Educational Equipment

    SR3102 Stand Alone Generator Set Trainer Educational Equipment, Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • ZM3115 Traffic light Trainer Didactic Equipment

    ZM3115 Traffic light Trainer Didactic Equipment. Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • ZM6102 LCD TV Trainer Educational Equipment

    ZM6102 LCD TV Trainer Educational Equipment. Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • ZF-RF3020A RF Training Kit 1.0GHz Educational Training Equipment

    ZF-RF3020A RF Training Kit 1.0GHz Educational Training Equipment. Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading Fluid Lab Equipment,air conditioner trainer, refrigeration trainer, Thermal Lab Equipment, Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • ZE3126S Three Phase AC Motor Educational Training Equipment

    ZE3126S Three Phase AC Motor Educational Training Equipment. Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

     

  • ZE3125S Single Phase AC Motor Trainer Teaching Equipment

    ZE3125S Single Phase AC Motor Trainer Teaching Equipment. Jinan Should Shine Didactic Equipment Co., Ltd. is company specialized in manufacture and trading Engineering Educational Equipment,Technical Teaching Equipment,Vocational Training Equipment,Didactic Equipment for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.