Fluid Mechanics Teaching Equipment

Fluid Mechanics Teaching Equipment

Fluid Mechanics Teaching Equipment for engineering university,college, technical institution, vocational training schools.

  • Air Flow Training Unit Hydraulic Lab Equipment Vocational Training Equipment

    ZF1129A Air Flow Training Unit Hydraulic Lab Equipment Vocational Training Equipment
    The designed of the Air flow taining model should demonstrate to students the principles of compressible fluid flow.
    Centrifugal Fan
    Capacity : 1,100 CFM
    Inlet dia. : approx. 180 mm
    Power : 2 hp
    Electrical : 415VAC/3-phase/50-60Hz
    Multitube Manometer Test Board:
    No. of tubes : 14
    Materials : clear acrylic
    Scale length : 400 mm
    Venturi, Orifice and Pitot Tube Flow Measurement Test Sets:
    Traversed pitot tube with adjustable scale
    Orifice plates (two different sizes)
    Venturi nozzle (two different sizes)
    Bernoulli’s Theorem Test Set:
    Clear acrylic duct with convergence, throat and divergence sections.
    Traversed pitot tube installed in centre line of the duct.
    Flow Around A Bend:
    Acrylic 90o bend squre ducting with a straight section before the bend dimension 60 x 50 mm
    (Require FM 21A -Multitube Manometer Test Board)
    Flow In Pipes:
    Different pipe sections to study:
    ¨ Duct entry pressure profile
    ¨ Suden enlargement losses from 65 to 95mm Dia
    ¨ Friction loss in 2.8m pipe (95mm Dia)
    …Velocity of profile in 2.8m (95mm Dia)
    (Require – Multitube Manometer Test Board)
    Jet Dispersion Test Set:
    Traversed pitot tube
    Boundary Layer Growth Test Set:
    Traversed pitot tube to measure velocity profile at four different locations Reversible flat plate with sharp and blunt leading edges and smooth and roughened surfaces
    Smoke Generation System
    Includes a smoke generator to demonstrate visually the flow of air around models.
    Control Panel:
    Fan ON/OFF switch
    Variable Speed Drive Controller
    Electrical : 415VAC/3-phase/50-60Hz
    OVERALL DIMENSIONS
    Height : 1.20 m
    Depth : 0.75 m
    Width : 1.50 m
    Brand: Shouldshine
    Model:ZF1129A

  • Fluid Friction Apparatus Hydromechanic Lab Equipment Teaching Equipment

    ZF1126A Fluid Friction Apparatus Hydromechanic Lab Equipment Teaching Equipment
    Measuring system for investigating flow losses
    Measured section with standardised pipe lengths and pipes made of different materials and of different diameters
    Measured section with various elbows and bends
    Measured section with various isolating fittings
    Measured section with various transparent measured objects
    High Quality frame and back board to support test circuits
    Overall dimensions:
    * Height : 1.05m form the ground level
    * Width : 2.25m
    * Depth : 0.43m
    Test Pipe Diameters:
    Smooth-bore pipes of various diameters
    17mm
    10mm
    6mm
    An artificially roughened pipe (17mm)
    The Pipe network should have 90° Bends, 90° elbow,90°T, 45°elbow & Y.
    Sudden enlargement
    Sudden contraction
    Ball Valve
    Gate Valve
    Globe valve
    Inline strainer
    Venturi made of clear acrylic
    orifice palte made of clear acrylic
    Pitot Static tube section made of clear acrylic

    Brand: Shouldshine
    Model:ZF1126A

  • Fluid Mechanics Trainer Fluid Mechanism Lab Kit Teaching Equipment

    ZF1123A Fluid Mechanics Trainer Fluid Mechanism Lab Kit Teaching Equipment
    Brand: Shouldshine
    Model:ZF1123A
    Specification
    [1] trainer for fluid mechanics experiments
    [2] interchangeable measuring objects, partly transparent: angle seat valve, diaphragm valve, ball valve, non-return valve, strainer, Pitot tube, Venturi nozzle, orifice plate flow meter and measuring nozzle
    [3] different pipe sections
    [4] annular chambers allow precise measurement of pressure
    [5] tube manometer for measuring the differential pressure
    [6] flow measurement using rotameter
    [7] digital displays for pressure and differential pressure
    [8] software for data acquisition via USB under Windows Vista or Windows 7
    [9] additional set of measuring objects
    Technical Data
    Pump
    – power consumption: 0,68kW
    – max. flow rate: 7,2m³/h
    – max. head: 22,8m
    Storage tank: 55L
    Pipe section for interchangeable measuring objects

    32×1,8mm, PVC
    3 straight pipe sections, length: 1000mm
    – ½”, St, galvanised
    – 18x1mm, Cu
    – 20×1,5mm, PVC
    Pipe section, PVC
    – gradual contraction, diameter: 20×1,5-16×1,2mm
    – gradual enlargement, diameter: 20×1,5-32×1,8mm
    – with 90° pipe angle/ pipe bend,
    diameter: 20×1,5mm
    Tube manometer: 2x 2 tubes, 1x 6 tubes
    Measuring ranges
    – differential pressure: 0…200mbar
    – pressure: 6x 0…600mbar
    – flow rate: 0,4…4m³/h
    – temperature: 0…60°C

    Dimensions and Weight
    LxWxH: 2220x820x1980mm
    Weight: approx. 250kg

  • FREE AND FORCED VORTEX Fluid Lab Equipment Educational Equipment

    ZF1103A FREE AND FORCED VORTEX Fluid Lab Equipment Educational Equipment
    I. Product overview
    This product needs to be used with the basic hydraulic bench
    This product is equipped with a transparent water storage tank and a scaled scale for more intuitive observation of the eddy current shape.
    This product can experimentally study the difference between “free vortex” and “forced vortex”, “forced vortex” surface profile, “free vortex” surface profile and total head distribution, and observe the secondary eddy current in “free vortex”
    II. Equipment features
    The product uses transparent tube and transparent material storage tank to facilitate the observation of fluid movement direction and fluid shape.
    With pneumatic joints and pagoda joints, it is more convenient and quick to connect the pipe fittings.

  • Losses in Pipe Systems Fittings Educational Equipment Fluid Lab Equipment

    ZM8127 Losses in Pipe Systems Fittings Educational Equipment Fluid Lab Equipment
    “Specification
    Panel for the demonstration and visualization of friction loss
    • Investigation of the friction loss in pipe constrictions, elbows, bends, fittings
    • 13-tube manometer
    • Circulating pump, 3 stages, max. 60W
    • 13-tube manometer 1600mmWC
    • Flow rate measuring range: 0…1000ltr/h
    • Supply tank: approx. 5ltr
    • Circulating pump:
    • Max. flow rate: 60ltr/min,
    • Max. head 4m
    Pipe diameter: 19.48mm
    Differential pressure gauge: 0 to 1.4bar
    Enlargement diameter: 26.2mm
    Contraction diameter: 19.48mm
    Fittings:
    – 45° mitre
    – 90°elbow
    – short bend
    – large bend
    – enlargement
    – contraction
    Manometer range: 0 to 440mm
    Number of manometer tubes: 12
    Flow rate measuring range: 0…1000ltr/h
    EXPERIMENTAL CAPABILITIES
    ¨ measuring the losses in the devices related to flow rate and calculating loss coefficients related to velocity head
    ¨ comparing the pressure drop across each device

    Brand: Shouldshine
    Model:ZM8127

  • Multi-pump Test Rig Fluid Lab Equipment Hydromechanics Experiment Equipment

    ZF1128A Multi-pump Test Rig Fluid Lab Equipment Hydromechanics Experiment Equipment

    Brand: Shouldshine
    Model:ZF1128A
    The Design should allow the student to demonstrate the principle operating charcteristics of different types of pumps.
    The unit should vome with 2 centrifugal pumps and a positive displacement pump
    the unit should be incorporate with appropriate pipe work and tanks to make the operation self contained the unit should have manually operated valve and pipe work should be arrange for rapid and safe selction of any one test pump. Measurment sensors are included to monitor the pump speed, power pump head and flowrate.
    The unit should be self contained constructed on epoxy coated steel frame and paltform with lockable wheels.
    The control box should be protected against the water splashes
    Process pipes should be 1 inches
    Dispalcement pump : Pipe size 1/2 Inches
    Horizontal single stage Centrifugal Pump:
    Capacity : 30 LPM
    Head : 10 M
    Eelctrical : 415 V AC /3 Phase / 50 Hz
    Vertical Multistage Centrifugal Pump:
    Capacity : 50 LPM
    Head : 30 M
    electrical : 415V AC /3 Phase /50 Hz
    Gear Pump
    Capacity : 8.5 LPM @10 bar
    electrical : 415V AC /3 Phase /50 Hz
    Water Tank
    Capacity : 100L
    Material : Stainless Steel
    Oil Tank
    CAPACITY : 30 L
    Material : Stainless Steel
    Instruments: The unit shoulf be fitted with all the necessary measuring devices for measuring flowrates, Pump speeds and motor power
    OVER ALL DIMENSION:
    Length : 2.42 m
    Width : 1.20 m
    Height : 1.82 m

  • Osborne Reynolds Experiment Hydro Lab Equipment Educational Equipment

    ZM8151 Osborne Reynolds Experiment Hydro Lab Equipment Educational Equipment
    Specification
    [1] Experimental set-up to study the formation of vortices in liquids, for use with basic hydrauic bench
    [2] l x w x h 630x400x675mm, 18kg
    [3] Plexiglas tank on powder coated base plate, complete with pipe work, fittings and connections, as well as measuring device with vertical/radial scale
    [4] Vortex generated via outlet inserts or impeller with 3 blades
    Brand: Shouldshine
    Model:ZM8151

  • Pipe Friction Training Panel Vocational Training Equipment Fluid Lab Equipment

    ZF1117A Pipe Friction Training Panel Vocational Training Equipment Fluid Lab Equipment
    Specification
    [1] investigation of the pipe friction in laminar or turbulent flow on Hydraulic Bench
    [2] transparent tank with overflow ensures constant water inlet pressure in the pipe section for experiments with laminar flow
    [3] water supply via Base Module ( Hydraulic Bench) or via laboratory supply for experiments with turbulent flow
    [4] flow rate adjustment via valves
    [5] twin tube manometer for measurements in laminar flow
    [6] dial-gauge manometer for measurements in turbulent flow
    [7] flow rate determined by base module Hydraulic Bench
    [8] water supply using base module ( Hydraulic Bench) or via laboratory supply
    * Diameter of test pipe : 3.0mm ( Bore)
    * Length of test pipe : 524mm
    * Needle Valve included to regulate flow rate
    length: 1000mm – Pipe section 1: acrylic 20×1.5mm – Pipe section 2: steel 1/2″ –
    Smooth-bore pipes of various diameters Size – 6mm , 10mm, 17mm
    Overall dimensions:
    * Height : 1.05m form the ground level
    * Width : 2.25m
    * Depth : 0.43m
    Test Pipe Diameters:
    The Pipe network should have 90° Bends, 90° elbow,90°T, 45°elbow & Y.
    Sudden enlargement
    Sudden contraction
    Ball Valve
    Gate Valve
    Globe valve
    Inline strainer
    Venturi made of clear acrylic
    orifice palte made of clear acrylic
    Pitot Static tube section made of clear acrylic
    EXPERIMENTAL CAPABILITIES
    Laminar to turbulent flow regimes in pipes
    Energy losses in pipe fittings and bends
    Flow measurement using venturi meter
    Flow measurement using orifice plate
    Use of pitot static tube
    Use of manometers

    Brand: Shouldshine
    Model:ZF1117A

  • Sedimentation Studies Apparatus Fluid Mechanics Lab Equipment Teaching Equipment

    SR1120E Sedimentation Studies Apparatus Fluid Mechanics Lab Equipment Teaching Equipment
    I.Product overview
    1.1 Overview
    The equipment is used to study the basic physical process of sedimentation, including the formation of the zone and the hindered precipitation, so that students have a preliminary intuitive understanding of the basic physical process of precipitation. The training of students’ corresponding knowledge and skills is suitable for the practical training and assessment of relevant majors in higher vocational, high school, secondary vocational schools and technical schools.
    1.2 Feature
    (1) the practical training platform adopts aluminum profile frame structure, each unit is flexible, easy to use and not easy to damage.
    (2) five glass columns of the same size are mounted vertically on the back board to form a measurement scale.
    (3) each column can be easily removed from the backboard for cleaning, filling and mixing of solid particles.
    (4) use the bench base and background light to make the observation more convenient.
    1.3 Learning objectives/experiments
    determination and comparison of the settling velocities of solids in suspensions
    dependent on the solid density and concentration and the liquid density and viscosity
    influence of coagulants on the settling velocity

    1.4 Specification
    experiments in the fundamentals of sedimentation
    5 transparent tanks with scale for comparison of the settling velocities of solids in various suspensions
    tanks removable for filling, mixing and cleaning
    tanks backlit by fluorescent tubes to aid observation
    3 measuring cups for preparation of suspensions
    pycnometer to determine the density of the liquids and solids
    stopwatch to record the sedimentation time
    recommended accessories: balance,coagulant

  • SR-S12 Advanced Hydrology Study System Teaching Equipment

    SR-S12 Advanced Hydrology Study System Teaching Equipment. Jinan Should Shine Import And Export Co., Ltd. is company specialized in manufacture and trading Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • SR-S13 Advanced Hydrology Trainer Vocational Training Equipment

    SR-S13 Advanced Hydrology Trainer Vocational Training Equipment. Jinan Should Shine Import And Export Co., Ltd. is company specialized in manufacture and trading Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.

  • SR-W7 Model Sedimentation Tank Teaching Equipment

    SR-W7 Model Sedimentation Tank Teaching Equipment. Jinan Should Shine Import And Export Co., Ltd. is company specialized in manufacture and trading Vocational Training Equipment,Didactic Equipment,Engineering Educational Equipment,Technical Teaching Equipment,for university,college,technical institution, polytechnics.Should Shine products has been exported to America,Asia,Europe,Africa, Australia.